Hey guys, im usually not in this part of the forums, but a buddy of mine wants to put a sony xplod head unit in his car. I didnt want to install it for him without having the proper wire diagram. Anyone out there have one? i just need to see which wire is what so i can install his radio. Thanks.

 

first off this is not the plac eto post and second what the hell u tlaking about? what kin dof informantion u wnat us to go by say sont explode. try giving us the porper info and maybe ull get better answers. what model what car what yr and the most important what model sony explode. and this anint nothing technical for integra. i would help u but u can easily find this crap info on sony site.

 

http://www.team-integra.net/se...D=320

Read the entire article, very useful.

 

Here, I think might help.

Constant 12V+ Blue/White
Switched 12V+ Yellow/Red
Ground Black
Illumination Red/Black
Dimmer n/a
Antenna Trigger n/a
Antenna Left Rear
Front Speakers 5 1/4" Doors
Left Front (+) Blue/Green
Left Front (-) Gray/Black
Right Front (+) Red/Green
Right Front (-) Brown/Black
Rear Speakers 6" x 9" Rear Deck
Left Rear (+) Blue/Yellow
Left Rear (-) Gray/White
Right Rear (+) Red/Yellow
Right Rear (-) Brown/White

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bcrosby51 &raquo;</TD></TR><TR><TD CLASS="quote">Here, I think might help.

Constant 12V+ Blue/White
Switched 12V+ Yellow/Red
Ground Black
Illumination Red/Black
Dimmer n/a
Antenna Trigger n/a
Antenna Left Rear
Front Speakers 5 1/4" Doors
Left Front (+) Blue/Green
Left Front (-) Gray/Black
Right Front (+) Red/Green
Right Front (-) Brown/Black
Rear Speakers 6" x 9" Rear Deck
Left Rear (+) Blue/Yellow
Left Rear (-) Gray/White
Right Rear (+) Red/Yellow
Right Rear (-) Brown/White
</TD></TR></TABLE>

THanks dude thats what i needed. Too bad other people are being ******** instead of helping somone.

 

Too bad you didnt read the TI article.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CompanyFlow &raquo;</TD></TR><TR><TD CLASS="quote">Too bad you didnt read the TI article.</TD></TR></TABLE>

That TI article is for if you still have the factory harness in the car, this guy did not, he needed to know what the colors of the factory wires are, which the TI article did not mention.

 

Yeah, on the front page you moron. Why do you think I told him to read the ENTIRE article? MAYBE BECAUSE THERES MORE THAN ONE PAGE.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civic89si666 &raquo;</TD></TR><TR><TD CLASS="quote">Hey guys, im usually not in this part of the forums, but a buddy of mine wants to put a sony xplod head unit in his car. I didnt want to install it for him without having the proper wire diagram. Anyone out there have one? i just need to see which wire is what so i can install his radio. Thanks.</TD></TR></TABLE>

The best way to do it is to buy a Wiring harness for the car your putting the deck in.. then your not cutting or messsing wiht any factory wires.. It just plugs into the Stock harness, then you solder that to your cd player's harness... very slick..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CompanyFlow &raquo;</TD></TR><TR><TD CLASS="quote">Yeah, on the front page you moron. Why do you think I told him to read the ENTIRE article? MAYBE BECAUSE THERES MORE THAN ONE PAGE.</TD></TR></TABLE>

You tell me where on the first page it mentions the wire colors for the factory wiring? That is what he wanted. Yes, there are three pages, it is a great write up, but it is for when you still have the factory wire harness, which this guy did not. Why don't you figure out what this dude really wanted before you go and call people morons? Notice how my post helped and yours did not, so who is the moron now? ***.

 

Its the EIA standard, same thing. Position of the plug is the exact same. ***.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CompanyFlow &raquo;</TD></TR><TR><TD CLASS="quote">Its the EIA standard, same thing. Position of the plug is the exact same. ***.</TD></TR></TABLE>

I don't even think we are talking about the same thing anymore. I am MECP certified and have been installing, professionaly, over 10 years now. The guy didn't have a factory wire harness, your little write up would not have helped him. If the factory wire harness is there, then yes, you would use an aftermarket harness and hook it right up.