tokiko illumina's, ground control springs for EF and suspension techniques sway bar for DA
Thread Starter
Junior Member
iTrader: (5)
Joined: Jun 2003
Posts: 753
Likes: 0
From: South Sacramento
tokiko illumina's, ground control springs for EF and suspension techniques sway bar for DA
1) tokiko illumina's(5 way adjustable) and ground control springs from my 90 si, used for about 2 years. excellent condition 300 obo picked up.
2) Suspension techniques rear sway bar for DA. it is missing a couple bolts 80 picked up.
2) Suspension techniques rear sway bar for DA. it is missing a couple bolts 80 picked up.
Thread Starter
Junior Member
iTrader: (5)
Joined: Jun 2003
Posts: 753
Likes: 0
From: South Sacramento
to be honest with you somebody sold it to me as an EF rear sway bar, but when i went to install it, it didnt clear my muffler. after looking into it i discovered that it is for a Da. it is missing one bolt/nut/washer that bolts a bushing to the sway bar. there are 3 other sets of the same combo so replacing it would be as easy as taking one of those sets to a hard ware store and matching it up. FYI I am not planning on shipping it.
Thread Starter
Junior Member
iTrader: (5)
Joined: Jun 2003
Posts: 753
Likes: 0
From: South Sacramento
well, i don't have any idea where that is haha. i have only lived up here for about 10 months. i live in 95820, or south sac as it is often referred to. if you are interested we can meet up and you can look at it in person(i don't have a camera).
Honda-Tech Member
Joined: Oct 2006
Posts: 772
Likes: 0
From: Los Angeles, CA, United States
Re: (phoenix1.8)
Mmm tempting. Right now i have a fatty 23mm type R swaybar in my garage that appears to be an intimidating install for me. I live near the florin road exit off Interstate 5.
Trending Topics
Thread Starter
Junior Member
iTrader: (5)
Joined: Jun 2003
Posts: 753
Likes: 0
From: South Sacramento
im trying to figure out the spring rates. this is all the info i have. i may call ground control in a bit. on the rear it says 88823 on one part and gc180.64.44 on another. the fronts say 87570 and gc180.64.61.
Honda-Tech Member
Joined: Jun 2004
Posts: 1,160
Likes: 1
From: Bay Area, CA, usa
your springs are 250 lbs and 350 lbs, both 7". Unfortunately, that's too short for me. Can I buy just the Ground control sleeves? Or at least just the sleeves and springs? PM me. Thanks
