please help any warnings and how to need pictures yes i know theres 2 bolts and where to put it but is there anything i should look out for

 

ohhh man.. this was covered before.... search. there arent any warnings except maybe stripping bolts.. pretty simple.. take out 2 bolts and put the bar on then bolt it down

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by i-VTEC_DOHC &raquo;</TD></TR><TR><TD CLASS="quote">ohhh man.. this was covered before.... search. there arent any warnings except maybe stripping bolts.. pretty simple.. take out 2 bolts and put the bar on then bolt it down</TD></TR></TABLE>

you didnt answer my question plus i did it and you didnt mention to make sure to suport the car

 

Do you seriously want advice with a mouth like that?

 

oh, YOU USE A 14MM SOCKET

 

please help any warnings and how to need pictures yes i know theres 2 bolts and where to put it but is there anything i should look out for

See the post you made? It makes absolutely no sense, especially "How to need pictures."

 

Most everyone here needs to calm down. Some of the posts were ridiculous.

 

well obviously you would jack the car up.. cuz u take the bolt out of the arm. everyone knows that.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by toyomatt84 &raquo;</TD></TR><TR><TD CLASS="quote">Most everyone here needs to calm down. Some of the posts were ridiculous.</TD></TR></TABLE>
ya just like the question that started the thread

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by toyomatt84 &raquo;</TD></TR><TR><TD CLASS="quote">Most everyone here needs to calm down. Some of the posts were ridiculous.</TD></TR></TABLE>

i dont think we've been mean enough. I thin kwe are TOO calm.

 

and dont get smart with me crazybluecivic

 

yeah what toyomatt84 said.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by i-VTEC_DOHC &raquo;</TD></TR><TR><TD CLASS="quote">
ya just like the question that started the thread</TD></TR></TABLE>

That is irrelevant. He wanted to know a simple question, and most everyone here cut his head off for it, in a rather profuse manner.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by toyomatt84 &raquo;</TD></TR><TR><TD CLASS="quote">

That is irrelevant. He wanted to know a simple question, and most everyone here cut his head off for it, in a rather profuse manner.</TD></TR></TABLE>

cause when someone did respond NICELY he cut THEIR head off first.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sujak &raquo;</TD></TR><TR><TD CLASS="quote">

cause when someone did respond NICEFULLY he cut THEIR head off first.</TD></TR></TABLE>

It's not your responsibility to jump on him for that. He got reported for the comment, and lost points due to it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by toyomatt84 &raquo;</TD></TR><TR><TD CLASS="quote">

It's not your responsibility to jump on him for that. He got reported for the comment, and lost points due to it.</TD></TR></TABLE>

i felt i needed say what i did, sorry im only human i do make wrong decisions.

 

people say that crazybluecivic is a cop! lol. https://honda-tech.com/zerothread?id=2047265

 

at least somebody is on my side.. thanks sujak

 

To the OP, put something/jack or whatever under the control arms where the bolts are. This will keep them aligned with the hole soo it's not a pain in the *** to get the bolts back in. I thought it was going to take me five minutes but ended up taking a good half hour lining up the damn holes.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by toyomatt84 &raquo;</TD></TR><TR><TD CLASS="quote">

That is irrelevant. He wanted to know a simple question, and most everyone here cut his head off for it, in a rather profuse manner.</TD></TR></TABLE>
thank you! someone sees my point

i got it done i just wish peeps would try to help instead of throwing stones at me ya know

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by OSK Automotive &raquo;</TD></TR><TR><TD CLASS="quote">To the OP, put something/jack or whatever under the control arms where the bolts are. This will keep them aligned with the hole soo it's not a pain in the *** to get the bolts back in. I thought it was going to take me five minutes but ended up taking a good half hour lining up the damn holes.</TD></TR></TABLE>

see this is help and yess when i decided to install it i didnt use jacks because of the first persons answer and had a hell of a time but now its all good and no im not a (cop) silla fast and the furious kid

 

Sujak, do you ever talk to anybody in a decent manner? Yeah you might have issues with what people say or how they go about certain things, but your constant flaming and hate is getting boring.

 

I love how people fight on this. i find it rather amusing. the flame and then the come backs. it's great. we could make a film about HT users. Make a film using exact HT names. LOL.

don't know if you need help anymore but you can use a c clamp to hold the arm in place so u can slide the screw out easily. the slide the screw threw the hole in the tie bar and back through the it's original holes. do for the other side!

vwala installed. make sure it's not crooked. haha.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EM2_UK#1 &raquo;</TD></TR><TR><TD CLASS="quote">Sujak, do you ever talk to anybody in a decent manner? Yeah you might have issues with what people say or how they go about certain things, but your constant flaming and hate is getting boring.</TD></TR></TABLE>

why would i care what you think? rofl

 

here we go again! time to catch some popcorn and soda. O_O