Has anyone done this?

I am in the process but it seems that the bracket that holds up the manifold on the ef8/sir doesnt work with a dc2r manifold

it is too far back and too high?


help?

 

dont even need it.

 

so i should remove the bracket??

is the bracket needed by anything else?


anyone know if the bracket will work with the dc2r mani though

 

just take it off

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 4sd4dr &raquo;</TD></TR><TR><TD CLASS="quote">dont even need it.</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gibsanez &raquo;</TD></TR><TR><TD CLASS="quote">just take it off</TD></TR></TABLE>

Third time is the charm....

Just take it off, you dont need it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SIred91 &raquo;</TD></TR><TR><TD CLASS="quote">Quote, originally posted by 4sd4dr »
dont even need it.

Quote, originally posted by gibsanez »
just take it off

Third time is the charm....

Just take it off, you dont need it..</TD></TR></TABLE>

haha this is why i love H-T

 

how do i remove it

is it needed for anything else on the engine
like the black box PCV?

 

bump for bracket removal knowledge

 

Step 1 - Take off the Bolts and remove bracket.
Step 2 - Have a beer

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gibsanez &raquo;</TD></TR><TR><TD CLASS="quote">Step 1 - Take off the Bolts and remove bracket.
Step 2 - Have a beer</TD></TR></TABLE>
Amen

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dxs &raquo;</TD></TR><TR><TD CLASS="quote">how do i remove it

is it needed for anything else on the engine
like the black box PCV?</TD></TR></TABLE>

I was gunna say something smart ***, but its easy to take for granted that not everyone on here has seen their and many other motors from all sides and angles whilst out of the car (or still in for that matter.)

and besides, it doesn't get much better than this:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">
Step 1 - Take off the Bolts and remove bracket.
Step 2 - Have a beer
</TD></TR></TABLE>


Modified by 89s1 at 9:15 PM 7/25/2007

 

interesting comments..

well i had a quick look again (i am waiting on a part so the car is in pieces)

Seems the bracket is a top support for the black box of the pcv..

so it may be possible to remove the bracket
but i am wondering if the support for the black box will be an issue