Anybody running a under axle exhaust system on a EF hatch? I'm thinking about upgrading my exhaust system once my swap is in. And going 2.5 from the header back, and would like to run it straight back and under the axle angled out.

If you have pics, post them up.

 

I would have to see pics, but it seems if you have your hatch really low to the ground, the exhaust might hit the ground all the time. I am running stock muffler and it ticks the ground over some dips and driveways.

What muffler would ya run or a couple inline resonators, with an exposed polished end for that Buddy Club III look???

I want to run just a basic 2.25 piping from header back, with a resonator, and a flowmaster/dynomax muffler in the stock location, but have the exit tucked up out of view. I want my sedan to look clean from all angles. Nothing ugly and protruding from the bottom side.

Anyways, lets see some pictures of the underaxle combo.

 

Well I would at least have one long or 2 small resonators with just the open end tip. I could pretty much careless how it looks, I'm setting this car up for autox and hpde's. And would be a summer only car.

Or I might would run a apexi N1 with high flow cat, and one resonator.

I'm only concerned ith the gas tank, and endless scraping.

My car is pretty low now, but once I install the egay coilovers I would raise it up. And only lower it for events.