When I move the front seats all the way forward, and recline the back of the front seats all of the way down, the seats don't fit flush with the beginning of the rear seats (refresh mode). Is there some way to move the rear seats back, so both front and rear seats will be level with each other. I have seen photos of fully functioning refresh mode, so I know it can be done, but I don't know what I am doing wrong. Any advice will be appreciated.

 

i believe if the back seats arent fully reclined i dont think you can push the front seat all the way down so its flush.

the back seats recline about an inch or two more. if you pull up on the lever (next to the headrest) and push back.. it will click into place a little further back. hope this helps

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 07ssmfit916 &raquo;</TD></TR><TR><TD CLASS="quote">i believe if the back seats arent fully reclined i dont think you can push the front seat all the way down so its flush.

the back seats recline about an inch or two more. if you pull up on the lever (next to the headrest) and push back.. it will click into place a little further back. hope this helps </TD></TR></TABLE>

This man is correct.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jetydosa &raquo;</TD></TR><TR><TD CLASS="quote">

This man is correct. </TD></TR></TABLE>

Yup, it's funny how many people forget about that.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eL &raquo;</TD></TR><TR><TD CLASS="quote">

Yup, it's funny how many people forget about that.</TD></TR></TABLE>

i have to say i probably wouldnt remember if i didnt have my cargo cover.. the gap between the back of the seat and the cargo cover just seems too big when the seats are not reclined all the way back.

 

You people were absolutely correct. It works great, now that I tried using the suggestion you gave. Many thanks from this Newbie