FS: accord/prelude turbo kit TX
Thread Starter
Honda-Tech Member
Joined: Jun 2004
Posts: 139
Likes: 0
From: San Antonio, Texas, USA
FS: accord/prelude turbo kit TX
Price
$1000
Contact information
honda_Accord_03@yahoo.com
Is the item new or used
Used
-----------------------------------------------------
Product description
I have a turbo kit for sale. This kit will work on the following motors: F22ax, F20a, jdm f22b, or h23. Will NOT work on 94-97 accord usdm F22bx motors. The kit has been used on my car for about 2 years with no problems at all. I only dyno'd @ 8psi when i was auto, and saw 188whp/188wtq before the tranny went out shortly after. I've seem these kits put out 250wheel on h23s with 8 psi. The kit will consist of the following:
- MHI 16g EVOIII turbo, hand ported/polished for boost creep prevention (purchased new 2 yrs ago, less than 12k on it, no shaftplay as of last month, will rechaeck before final sale)
- DSM EVOIII Wastegate actuator
- DSM 1st gen manifold, redrilled for F22/H23, tapped for EGT
- DSM 1st gen 02 housing, very slightly ported to help boost creep
- DSM J pipe, rotated
- DSM 1st gen bov
- DSM 450cc injectors, blue tops
- stealthmode oil feed line with black adapter
- stealthmode oil drain, will need to tap oil pan with metal hose barb
- stealthmode adustable oil line restrictor
- 2.5" crushbent downpipe
- DSM 1st gen heatshield for manifold
- coolant lines/taps, if you wish to watercool your turbo
- DMH performance electric cutout 2.5"
The only parts you should need are charge piping, FMIC and management. This kit requires you to lose the front motor mount and hack the block a tad (pm me if you need details).
a few pics of the installed setup:
on my old f20a
on my f22a4
[img]
pics of when i got the turbo new
Turbo kit is located in San Antonio, TX.
For any info/questions email me.
Thanks!
$1000
Contact information
honda_Accord_03@yahoo.com
Is the item new or used
Used
-----------------------------------------------------
Product description
I have a turbo kit for sale. This kit will work on the following motors: F22ax, F20a, jdm f22b, or h23. Will NOT work on 94-97 accord usdm F22bx motors. The kit has been used on my car for about 2 years with no problems at all. I only dyno'd @ 8psi when i was auto, and saw 188whp/188wtq before the tranny went out shortly after. I've seem these kits put out 250wheel on h23s with 8 psi. The kit will consist of the following:
- MHI 16g EVOIII turbo, hand ported/polished for boost creep prevention (purchased new 2 yrs ago, less than 12k on it, no shaftplay as of last month, will rechaeck before final sale)
- DSM EVOIII Wastegate actuator
- DSM 1st gen manifold, redrilled for F22/H23, tapped for EGT
- DSM 1st gen 02 housing, very slightly ported to help boost creep
- DSM J pipe, rotated
- DSM 1st gen bov
- DSM 450cc injectors, blue tops
- stealthmode oil feed line with black adapter
- stealthmode oil drain, will need to tap oil pan with metal hose barb
- stealthmode adustable oil line restrictor
- 2.5" crushbent downpipe
- DSM 1st gen heatshield for manifold
- coolant lines/taps, if you wish to watercool your turbo
- DMH performance electric cutout 2.5"
The only parts you should need are charge piping, FMIC and management. This kit requires you to lose the front motor mount and hack the block a tad (pm me if you need details).
a few pics of the installed setup:
on my old f20a
on my f22a4
[img]
pics of when i got the turbo new
Turbo kit is located in San Antonio, TX.
For any info/questions email me.
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
