well i have come to a little dilemma when switching turbos, my question is can i just drill and tap a new port in my turbo.....if not what should i do??
this is my old one where the wastegate vacuum was attached

and my new one

my

 

You can take the wastegate signal from any location that sees boost. Some manufacturers also recommend that the boost source be before the throttle body so the wastegate doesn't see vacuum, since it is possible for diaphram damage to occur if it does. However, many people plumb the wastegate signal from the intake manifold without issues.

 

mine goes to the intake manifold.

 

i had mine in my intercooler pipe

 

Shove a rag in it put the turbo on the bench and outlet on the bench drill it tapp it then pull the rag out

 

http://www.atpturbo.com/Mercha...e=BCS

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NJIN BUILDR &raquo;</TD></TR><TR><TD CLASS="quote">http://www.atpturbo.com/Mercha...e=BCS</TD></TR></TABLE>they really do sell everything there....

 

X2

 

just like that picture from ATP turbo, just put it in the cuppler.

 

hey thanks man i bought the quick tap