1994 EJ1 Turbo Coupe. B16A/GSR Tranny
This is the second time I'm putting the car up for sale. Last year I had this thing up for sale and decided I want to keep it.
Well its time to let her go. I'll be moving to Newfoundland or Borden this year so I must get rid of the car.
The car is clean inside and out all it needs is rear seat belts and carpets.
Engine is a built B16 with forged rods and pistons on stock sleeves. I spec'd the engine out and put it all together. I've been doing this for years.
The turbo is a T04E .57 trim currently set at 7psi with a really rich basemap.
The car comes with an Innovative motorsports LC1 wideband unit, Prestiege alarm sustem that was just installed.
There is too much to list. no track times are available since I did not have the chance to take it to the track this year.
Last year before the forged internals I ran a 13.9 with a smaller t3 turbo.
This car is built to handle 350-400hp and if I were to keep it my plans would of been low 12's to high 11's
The only thing you need is bigger injectors. the car currently has 460cc injectors.
I will also include a moates Burn1 eprom burner and Moates O meter so you can read the AFR's
Also comes with brand new Runways by Yokohama. Dont ask what the rims are, I'll miss them though. they are 15X7 offset and stick out nice and clean.
Car is sort of lowered on stock shocks and Tein S tech springs. Rides great.
I'm asking $5000CAD firm for everything. Must sell quick. The engine with internals would cost you $2500+ easily and thats if you do all of the work yourself.
This is a great deal guys. dont pass it up.
Here are a few pics.
I'm located in London Ontario Canada. Car is obviously drivable and can make any trip as long as you keep adding gas to it
My Contact info is:
Cell 1 519 697 7841
Email m_pajak@hotmail.com







Well its time to let her go. I'll be moving to Newfoundland or Borden this year so I must get rid of the car.
The car is clean inside and out all it needs is rear seat belts and carpets.
Engine is a built B16 with forged rods and pistons on stock sleeves. I spec'd the engine out and put it all together. I've been doing this for years.
The turbo is a T04E .57 trim currently set at 7psi with a really rich basemap.
The car comes with an Innovative motorsports LC1 wideband unit, Prestiege alarm sustem that was just installed.
There is too much to list. no track times are available since I did not have the chance to take it to the track this year.
Last year before the forged internals I ran a 13.9 with a smaller t3 turbo.
This car is built to handle 350-400hp and if I were to keep it my plans would of been low 12's to high 11's
The only thing you need is bigger injectors. the car currently has 460cc injectors.
I will also include a moates Burn1 eprom burner and Moates O meter so you can read the AFR's
Also comes with brand new Runways by Yokohama. Dont ask what the rims are, I'll miss them though. they are 15X7 offset and stick out nice and clean.
Car is sort of lowered on stock shocks and Tein S tech springs. Rides great.
I'm asking $5000CAD firm for everything. Must sell quick. The engine with internals would cost you $2500+ easily and thats if you do all of the work yourself.
This is a great deal guys. dont pass it up.
Here are a few pics.
I'm located in London Ontario Canada. Car is obviously drivable and can make any trip as long as you keep adding gas to it
My Contact info is:
Cell 1 519 697 7841
Email m_pajak@hotmail.com







Thread
Thread Starter
Forum
Replies
Last Post
turborex
Forced Induction
26
Feb 5, 2003 08:40 PM
boosted hybrid
Forced Induction
34
Dec 27, 2002 01:06 AM




