6 months ago i put my b16b into a 97 cx hatch.prior 92 cx motor ran with no problems. im having an issue now where at about 5k the rev limiter bounces spratacly , and the car starts with alot of hesitation in vtec till about 75k then all power to 88k?
I've changed to dizzy,rewired, and changed the coils over and over? throwing no cels. have had a cel 14 for a while but i believe i fixed it. have a obd2a-obd1 jumper harness with some slight mods to the wiring. the ecu is a p28 with an s200 unit.dont have a tuner no more to see whats going on.so now im stuck.do i look at all my grounds .vtec is grounded to the car not ecu. pressure switch was tapped into the jumper harness. any thoughts