To make a long story short, my bike is being featured in a bike show on July 3rd. I'm converting the old hand controls to 2006 CBR600RR controls and would like to know the diagram for said controls.

If anyone has a diagram they can send me, that would be fantastic or simply tell me what wire does what.

For the left hand control there is:

THICK WIRE LOOM w/12 pin clip:

Orange/ Black rectangles
Orange/ Solid white stripe, black rectangles
Light Blue/ Black rectangles
Light Blue/ Solid white stripe, black rectangles
Black/ Solid white grey stripe, grey rectangles
Black/ Grey rectangles
Black/ Grey rectangles (same as above)
White/ Black rectangles
Black/ Solid yellow stripe, white rectangles
Grey/ Black rectangles
Blue/ Solid white stripe
White/ Solid green stripe

SMALL WIRE LOOM w/ two wires and spade ends
Black/ Solid grey stripe, grey rectangles
Black/ Grey rectangles

SMALL WIRE LOOM w/ two wires
Black
Black


RIGHT HAND CONTROL

Wire loom with 7 pin connector

White / Black stripe
Black/ Green stripe
Black/ Red stripe
Yellow/ Red stripe
Blue/ White stripe
Black
Black/ Yellow stripe

Thanks for any help!