Just a sneak peak, teaser if you will.







All parts are being balanced atm.

More pics once I begin assembly

 

Awesome, where did the car come from? Start from the beginning.

 

I got it in a trade for my boosted c1 ek. Originally from Alberta at one time I think. But its been out here in vancouver/victoria for most of its life.

 

Good start. Keep us posted.

 

I see you left the shift linkage in place when you pulled the motor. That pin is a real bitch to get out.

 

Awesome. And a local too no less .

<-----subscribed

 

gotta love the way shiny new pistons look. good luck on the rest of it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ed 341 &raquo;</TD></TR><TR><TD CLASS="quote">I see you left the shift linkage in place when you pulled the motor. That pin is a real bitch to get out. </TD></TR></TABLE>


....hence the term "bitch pin."

Will this be na for fi?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Black R &raquo;</TD></TR><TR><TD CLASS="quote">


....hence the term "bitch pin."

Will this be na for fi?</TD></TR></TABLE>

Not with this



PN#: MST6565

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Black R &raquo;</TD></TR><TR><TD CLASS="quote">Will this be na for fi?</TD></TR></TABLE>

Judging by the looks of those pistons, NA...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by itrSteez &raquo;</TD></TR><TR><TD CLASS="quote">

Not with this



PN#: MST6565</TD></TR></TABLE>

i'll put ya'll on some ghetto tip..use a a/c compressor mounting bolt held with a vice grip and hit the pin out with a hammer and VOILA*..the pins out..reverse for install..been doin it like that since 1997 with no regrets..total cost $0...

 

itll be NA. And i just didnt feel like removing the bitch pin...especially seeing as it wasnt necessary.

 

what was wrong with the motor to do a rebuild?
what's happening to top end?

 

i just wanted to build it. May be getting a portflow head

Just got a call from my balancer. Aparently one of my eagle H beams was underweight by 14grams


Eagle

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Cpt Ben &raquo;</TD></TR><TR><TD CLASS="quote">Eagle </TD></TR></TABLE>

Carrillo

 

That motor will never run, but have no fear i know why. There is no head
get some more pics as the build is done.

 

very nice

 

So nice