I came across this pic while researching ITRs. Are those standard non-USDM foglights? Or are they custom? I noticed this ITR has a rear foglight and wider license plate area. What country is this from? "Acura" was only used in North America in the late 90s, right?

 

Eh, I noticed the "H" symbols in the pic. I'm guessing it's a European ITR? Anyways, I think those foglights look better than the USDM optional 1998 foglights.

 

Thats a very interesing photo brochure add...

That's definatly a UKDM Type R. Europe was the only places that got a US front end with Honda Badges, and the UK was the only place that got the JDM 16" look alike's in a 15" version. I also believe that Europe and Austraillia were the only places that those fogs were offered in, and yes, they're OEM. Also the clear corners came standard in the UK while the US and Canada got the amber ones.

But I'm almost certian that the UK didn't get that front end until 98 as well as the US, I dunno why it says 97. Also I think the "Acura Integra Type R" part in the upper left was copy / pasted into it, becasue that is DEFINATLY not an Acura.

 

euro
looks sexy imo...
too bad i gotta hack up the bumper

 

I'm curious if the USDM 98+ front bumper covers have the UKDM foglight cutout guidelines molded in.

 

The UK ITR

 

"
I'm curious if the USDM 98+ front bumper covers have the UKDM foglight cutout guidelines molded in. "

I believe they do. Not positive on that, but I think I read it .... somewhere >.<

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LunchboxZT &raquo;</TD></TR><TR><TD CLASS="quote">I also believe that Europe and Austraillia were the only places that those fogs were offered in, and yes, they're OEM. Also the clear corners came standard in the UK while the US and Canada got the amber ones.</TD></TR></TABLE>
right, this are the optional OEM-EUDM-fogs ... sadly they are no more available

the clear corners was all over europe.

 

Are there aftermarket "OEM-style" EUDM sets available? Those look so much better than the OEM USDM foglights.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Outrun &raquo;</TD></TR><TR><TD CLASS="quote">Are there aftermarket "OEM-style" EUDM sets available?</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr. Svonda &raquo;</TD></TR><TR><TD CLASS="quote">... sadly they are no more available </TD></TR></TABLE>

 

I had a couple people ask about these fog lights a couple weeks ago. I went to the dealer and inquired. I was told they were sold out and wouldn't be able to get them. I had the part number. The price was a little over 400 Euro (around 600. US) Most of the ITR's I see in Germany only have the rear fog.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Outrun &raquo;</TD></TR><TR><TD CLASS="quote">Are there aftermarket "OEM-style" EUDM sets available? Those look so much better than the OEM USDM foglights.
</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr. Svonda &raquo;</TD></TR><TR><TD CLASS="quote">
right, this are the optional OEM-EUDM-fogs ... sadly they are no more available
</TD></TR></TABLE>

He is wondering if there were any copies, "look-a-likes" , "OEM-style". You said, Mr. Svonda, there weren't any more available, that's why he is inquiring about fake ones.

 

If you look around, i bet you can find a set for sale. Check out the back of the your front lip and i believe there is a groove to cut out for these fogs and possibly the same goes for the front bumper. Id also like to hear info on where/if these fogs are available.

 

OMG those Foglights lock so F*****g Ugly that near nobody has them installed around here.
It´s funny because over here the most people think that the USDM Foglihts looks a lot smarter than these ones.
Everyone wants to get this things who aren´t available at their Area.

 

i like them. wandering if i could get a set?

 

I wouldn't mind finding the housing, and run some duct work to the front brakes. I need to find out if there are any bone yards around Nurburgring. It's only like 45 minutes away, and with all the nice rides that get trashed on the track, their is bound to be an ITR or two.

 

msg the aussie type r doctor...
i think his SN is australian type r? something like that

 

Am I the only one that thinks these are ugly? They look like a complete after-thought.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KetteringITR &raquo;</TD></TR><TR><TD CLASS="quote">Check out the back of the your front lip and i believe there is a groove to cut out for these fogs and possibly the same goes for the front bumper. </TD></TR></TABLE>

There is a pattern on the inside of the front bumper to cut the hole for the UKDM foglight housing. The lip spoiler does NOT have a pattern. Not a big deal to trace it after cutting the bumper.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by waddy41 &raquo;</TD></TR><TR><TD CLASS="quote">msg the aussie type r doctor...
i think his SN is australian type r? something like that</TD></TR></TABLE>

LOL! You mean "Austrian Type R" - he even bitches about the aussie thing in his sig

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D &raquo;</TD></TR><TR><TD CLASS="quote">

There is a pattern on the inside of the front bumper to cut the hole for the UKDM foglight housing. The lip spoiler does NOT have a pattern. Not a big deal to trace it after cutting the bumper.</TD></TR></TABLE>

Didn't you get those fog surrounds and use them for brake ducting?

 

usdm fogs&gt;than ukdm...
unless there is a big fmic in the way...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Splat &raquo;</TD></TR><TR><TD CLASS="quote">

LOL! You mean "Austrian Type R" - he even bitches about the aussie thing in his sig
</TD></TR></TABLE>

oops!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Splat &raquo;</TD></TR><TR><TD CLASS="quote">Didn't you get those fog surrounds and use them for brake ducting?</TD></TR></TABLE>

about 8 years ago.... Still have them in a box somewhere.

 

The master at work

http://www.sandmracing.com/

 

lol