GARAGE SALE :New Precision SC61, GSR Trans, Seats, D15B swap W/ full turbo kit, LS trans
Garage Sale
Everything must go: Prices arent firm on Everything, PM for Information Will except trades... list at bottom
All sold items so far
Have a Mint NO GRINDS GSR Hydo Trans w/ Phantom Grip LSD SOLD or trade for B16 depends on what shape its in, will consider all B16 trades
Also a LS Cable trans for sale SOLD
GReddy Turbo Timer BRAND NEW SOLD
Autometer Tach w/ shift light: used for only a few months, works perfect Sold
Autometer Boost gauge w/vacuum BRAND NEW w/ installation kit SOLD
D15 bottom endSold
Have a Brand New Precision 6152SP
Bought Turbo a Month ago brand new from Precision, It cost me almost $1,000.00
On the tag on the side it says PTB-500-6152. The turbine Housing is TH8152A. This is a T-4 .81 AR Exhaust Turbine side, and a .71 compressor side. The exducer diameter is 2.437", and the inducer is 2.759". The inlet on the compressor side is 4", and the outlet is 2.5". On the Exhaust side the exhaust is 3" v-band style. This turbo has NEVER even been bolted on. My loss is your gain, i hope someone makes huge power with this
HP rating is 650
I decided to go all motor afterall and i wish i had made my mind up earlier
Turbo is $700 shipped to anywhere in US, or $680 picked up
Or NEW deal
(If you buy the Turbo for $1300, i will give you a BRAND NEW InlinePro T4 manifold never ever been bolted up and a slightly used innovative 60mm wastegate ( i think its 60mm, it came off a 600+hp turbo ITR) either way was only used for a few months.) (the manifold and wastegate are over $1000 brand new!
And the turbo is 950 so thats around $2100 worth of parts for $1300... !!




Here is a pic of manifold and wastegate



I have a set of Buddy Club Spec 3 Cams with less than 3,000 miles on them, in fact they are still in car, but coming out soon. These are all-motor cams that can be daily driven with a smooth idle. These cams are in perfect condition with no visible wear... Dont have pics yet $380 B/O
Also a set of RSX Type S Grey Leather Seats $200 B/O or Trade for GSR seats


And a set of Integra Cloth Seats Very Goon Condition out of a DA $65- come and get them

Next is a D15B w/ LSD trans and Full Greddy Turbo kit Turbo kit SOLD, D15B swap now for sale, $750 for everything
comes with Axles, half shaft, Greddy Blue Box tuner, whole swap and everything in turbo kit.... has a Treadstone intercooler
Engine has 40,xxx miles and turbo kit has just over 1,000 miles
Everything runs great and is legit... Purchased from HMotors
will part Swap from Turbo kit for right prices, but will not part anything out


Next is Back Seats out of an 2003 Civic Si Black/Grey Very Clean (EP3) $30

A set or New Corner lights for a CRX $12

ITR stock rods w/ ARP rods (one rod has spun bearing) Has CTR PISTONS in GREAT CONDITION, comes w/ rings: would like to trade for new oem usdm b16 pistons: $80


2000 GSR cams less than 80,xxx GREAT CONDITION w/ cam gears $90
Great For BOOST!

99 LS cams in great condition $20

Stock b-series manifold $20

Apexi Turbo Timer New is box $50 or B/O

Email is gmacarize@hotmail.com
will accept trades for all b-series parts
If read please bump
thanks for looking
Looking for trades
NEED THESE PARTS
B16 Trans - any condition - OR B16 Gears in Great condition
B-series Synchros NEW
Skunk2 cams stage 2 or 3
Skunk2 Springs, retainers, ect.
Carbon Fiber Hood For EG Civic 92-95
Carbon Fiber Lip For EG Civic
Hondata S300
Cam Gears (skunk2 mainly-6 bolt mainly)
CTR Crank pulley - BOUGHT
AFR Tuner
440 injectors
New 81mm OEM piston rings
Modified by gmacarize at 7:38 PM 6/13/2007
Modified by gmacarize at 7:39 PM 6/13/2007
Modified by gmacarize at 7:51 PM 6/13/2007
Modified by gmacarize at 7:35 AM 6/17/2007
Everything must go: Prices arent firm on Everything, PM for Information Will except trades... list at bottom
All sold items so far
Have a Mint NO GRINDS GSR Hydo Trans w/ Phantom Grip LSD SOLD or trade for B16 depends on what shape its in, will consider all B16 trades
Also a LS Cable trans for sale SOLD
GReddy Turbo Timer BRAND NEW SOLD
Autometer Tach w/ shift light: used for only a few months, works perfect Sold
Autometer Boost gauge w/vacuum BRAND NEW w/ installation kit SOLD
D15 bottom endSold
Have a Brand New Precision 6152SP
Bought Turbo a Month ago brand new from Precision, It cost me almost $1,000.00
On the tag on the side it says PTB-500-6152. The turbine Housing is TH8152A. This is a T-4 .81 AR Exhaust Turbine side, and a .71 compressor side. The exducer diameter is 2.437", and the inducer is 2.759". The inlet on the compressor side is 4", and the outlet is 2.5". On the Exhaust side the exhaust is 3" v-band style. This turbo has NEVER even been bolted on. My loss is your gain, i hope someone makes huge power with this
HP rating is 650
I decided to go all motor afterall and i wish i had made my mind up earlier
Turbo is $700 shipped to anywhere in US, or $680 picked up
Or NEW deal
(If you buy the Turbo for $1300, i will give you a BRAND NEW InlinePro T4 manifold never ever been bolted up and a slightly used innovative 60mm wastegate ( i think its 60mm, it came off a 600+hp turbo ITR) either way was only used for a few months.) (the manifold and wastegate are over $1000 brand new!
And the turbo is 950 so thats around $2100 worth of parts for $1300... !!




Here is a pic of manifold and wastegate



I have a set of Buddy Club Spec 3 Cams with less than 3,000 miles on them, in fact they are still in car, but coming out soon. These are all-motor cams that can be daily driven with a smooth idle. These cams are in perfect condition with no visible wear... Dont have pics yet $380 B/O
Also a set of RSX Type S Grey Leather Seats $200 B/O or Trade for GSR seats


And a set of Integra Cloth Seats Very Goon Condition out of a DA $65- come and get them

Next is a D15B w/ LSD trans and Full Greddy Turbo kit Turbo kit SOLD, D15B swap now for sale, $750 for everything
comes with Axles, half shaft, Greddy Blue Box tuner, whole swap and everything in turbo kit.... has a Treadstone intercooler
Engine has 40,xxx miles and turbo kit has just over 1,000 miles
Everything runs great and is legit... Purchased from HMotors
will part Swap from Turbo kit for right prices, but will not part anything out


Next is Back Seats out of an 2003 Civic Si Black/Grey Very Clean (EP3) $30

A set or New Corner lights for a CRX $12

ITR stock rods w/ ARP rods (one rod has spun bearing) Has CTR PISTONS in GREAT CONDITION, comes w/ rings: would like to trade for new oem usdm b16 pistons: $80


2000 GSR cams less than 80,xxx GREAT CONDITION w/ cam gears $90
Great For BOOST!

99 LS cams in great condition $20

Stock b-series manifold $20

Apexi Turbo Timer New is box $50 or B/O

Email is gmacarize@hotmail.com
will accept trades for all b-series parts
If read please bump
thanks for looking
Looking for trades
NEED THESE PARTS
B16 Trans - any condition - OR B16 Gears in Great condition
B-series Synchros NEW
Skunk2 cams stage 2 or 3
Skunk2 Springs, retainers, ect.
Carbon Fiber Hood For EG Civic 92-95
Carbon Fiber Lip For EG Civic
Hondata S300
Cam Gears (skunk2 mainly-6 bolt mainly)
CTR Crank pulley - BOUGHT
AFR Tuner
440 injectors
New 81mm OEM piston rings
Modified by gmacarize at 7:38 PM 6/13/2007
Modified by gmacarize at 7:39 PM 6/13/2007
Modified by gmacarize at 7:51 PM 6/13/2007
Modified by gmacarize at 7:35 AM 6/17/2007
Trending Topics
IM INTERESTED IN YOUR LS TRANNY GET AT ME ASAP I HAVE CASH IN HAND OR GET AT ME ON <U>RANDYCHAN@TMAIL.COM</U>
ALSO INTERESTED IN YOU 2000 GSR cams less than 80,xxx GREAT CONDITION w/ cam gears $90 AND ITR PISTONS =]]]
How much for just the External wastegate. Have a friend looking for a turbo and a manifold will be sure to pass it along.
James
PS I new here and I can send PM's but can't figure out for the life of me how the receive PM's help me out without flaming me please.
James
PS I new here and I can send PM's but can't figure out for the life of me how the receive PM's help me out without flaming me please.
hey man, im interested in those cloth teg seats. how much to ship em to chicago?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by StillBoostin »</TD></TR><TR><TD CLASS="quote">
PS I new here and I can send PM's but can't figure out for the life of me how the receive PM's help me out without flaming me please.</TD></TR></TABLE>
if u recieve a PM, whenever u log back into the forums, it should popup a window with the msg in it
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by StillBoostin »</TD></TR><TR><TD CLASS="quote">
PS I new here and I can send PM's but can't figure out for the life of me how the receive PM's help me out without flaming me please.</TD></TR></TABLE>
if u recieve a PM, whenever u log back into the forums, it should popup a window with the msg in it
how interested are you, cause it wont be cheap to ship them to chicago... and im not willing to part out the manifold and wastegate enless i sell the turbo first... or sell ALL only as a package deal.
my fault man, its been a while since ive been on these forums. didnt realize there were seperate sections for different areas. yeah i'll prolly look for something a bit closer to me, heh



