Is it normal for the avcr to read like around .09 kg/cm2 of boost when the engine is off? Or is my stuff fucked up?

 

*bump*

 

it should read 0 kg/cm2....did u mount the pressure sensor perpendicular to the ground (barb end facing down)?....are u at sea level or higher elevation?

 

yeah its pointing straight down, im under 1000 feet above sea level

 

what does it read while you are at idle?

 

good question, ill be back in 5 mins

 

-475 @ 760 RPM

 

*bump*

 

There's something wrong w/ your AVC-R's MAP sensor. Mine reads anywhere between -3mm/Hg and -22mm/Hg (depending on location and temps) when the motor's off. At hot idle, mine'll read in the mid -600mm/Hgs.

 

ahh geeze, well im going to remount it somewhere else and see what happens.

 

[edit]cant delete post


[Modified by Aeka GSR, 5:32 PM 6/5/2002]

 

mine reads about -350 to -400ish mmhg at idle also, it sounds like yours is working properly. does it fluctuate while you are under boost? also, it sounds like your rpms are a little low, are the rpms accurate with your rpm's on your stock tachometer? do you have all your map sensor lines ran correctly?


[Modified by GudeH23a, 7:21 PM 6/6/2002]

 

mine reads .02kg when its off and 500mm at idle.