could i fit a chevy 305 fit in the trunk/back seat of my 95 ex 2door?

 

to install or as cargo?

 

I highly doubt you can do either; unless with some serious work.

 

Take your trunk off, take the tranny off throw a tire back there for padding, and strap it down.

 

Got friends?

One of them has a pickup.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ek forever guy &raquo;</TD></TR><TR><TD CLASS="quote">Got friends?

One of them has a pickup.</TD></TR></TABLE>

 

well i ask becasue i have to drive 7 hours to north carolina to get it and its for my pick up. i have an expedition but the whole 7 hour thing would kill me on gas. what if i took out my back seat? or perhaps my passenger seat?


i kinda do like this idea


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Eran &raquo;</TD></TR><TR><TD CLASS="quote">Take your trunk off, take the tranny off throw a tire back there for padding, and strap it down.</TD></TR></TABLE>

 

its just the motor too no tranny

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bseriescoupe &raquo;</TD></TR><TR><TD CLASS="quote">I highly doubt you can do either; unless with some serious work.</TD></TR></TABLE>

I think he wants to transport it.

 

even if you take the trunk off its not gonna open up the hole much. maybe through the passengerside door without the seat in there. or take apart the motor

 

Get some measurements from the owner. Then measure your trunk. My friend put a d series on the passenger side of his 95 coupe before.

 

if you fold down the seats, and remove the spare tire to fit the oil pan i suppose you can fish the ****** in there,

id take the sub tho, the civic will bog like a moterfucker man my civic was sitting rallye style with just a b16a in there

 

You should be worry about if you have enought torgue or not.

 

how much does it weigh? I had five people in my car and it went fine(D15B7). Ell but 2 of us weigh over 200lbs. its the breaking your gonna have to worry about.

 

it should fit, but your trunk won't be able to close.

 

If no one is coming with you take out the passenger seat it will fit right there just be sure to stick a tire under it for padding and strap it down so it wont slide around your car will have enough torque and stopping shouldnt be a problem.
If someone is coming with you go down there bring a socket wrench with you remove the rear seats before leaving when you get down there remove the passenger seat and slide it in through there into the back seat. then reinstall the passenger seat again have a tire for padding and strap it down tightly or your going to be getting new seats and possibly even some back surgery when seats are removed there is alot more room than expected. But if you can fit five people in a civic the engine shouldt be a problem remember it is just the motor no tranny it isnt going to weigh as much as you guys are thinking.

 

haha wow can say ghetto...j/k

 

for the money its gonna cost you in gas y not just have it shipped?

 

or just buy a local 305 arent they common? or a 350 arent 305 just de stroked 350's?

 

I fit 8 people in my ek once. So I think the car could handle it if you can fit it in there

please include pictures when you get it in there

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Team RS2 &raquo;</TD></TR><TR><TD CLASS="quote">or just buy a local 305 arent they common? or a 350 arent 305 just de stroked 350's? </TD></TR></TABLE>

I'd like to see you loose 45 cubic inches in rod stroke.

That's like saying a D15 is a destroked H22.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mikeycivic &raquo;</TD></TR><TR><TD CLASS="quote">for the money its gonna cost you in gas y not just have it shipped?</TD></TR></TABLE>

i was thinkin about that, but i got it for 100 bucks and i can go see my sis and bro in law who i dnt see very often

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Team RS2 &raquo;</TD></TR><TR><TD CLASS="quote">or just buy a local 305 arent they common? or a 350 arent 305 just de stroked 350's? </TD></TR></TABLE>

And you're calling me out in other threads about not turnin wrenches?

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Eran &raquo;</TD></TR><TR><TD CLASS="quote">

I'd like to see you loose 45 cubic inches in rod stroke.

That's like saying a D15 is a destroked H22.</TD></TR></TABLE>

Beat me to it.

 

dude sell ur car and buy a truck if urgunna put that engine in it

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crx4life90 &raquo;</TD></TR><TR><TD CLASS="quote">dude sell ur car and buy a truck if urgunna put that engine in it</TD></TR></TABLE>

He has a truck. He needs to pick up the engine for his truck. The truck gets horrible gas mileage. He wants to take his car to save on gas.

God, you kids need to learn to ******* read.