Skunk2 Head
Thread Starter
Joined: Jul 2004
Posts: 6
Likes: 0
From: Kelowna, BC
Skunk2 Head
Building a full Skunk2 head just wondering what other mods would be suggested? just putting it back together hope to have it tuned in a couple weeks going home to lap the valves right now
Honda-Tech Member
Joined: Jan 2004
Posts: 10,629
Likes: 1
From: Further down the spiral, TX, usa
Re: Skunk2 Head (Andrew J)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Andrew J »</TD></TR><TR><TD CLASS="quote">Building a full Skunk2 head just wondering what other mods would be suggested? just putting it back together hope to have it tuned in a couple weeks going home to lap the valves right now </TD></TR></TABLE>
Rocket valvetrain, Euro R manifold, Supertech valves, vented valvecover, etc...
Rocket valvetrain, Euro R manifold, Supertech valves, vented valvecover, etc...
Honda-Tech Member
Joined: Mar 2002
Posts: 5,000
Likes: 1
From: Phoenix, AZ
Re: Skunk2 Head (Hawkze_2.3)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hawkze_2.3 »</TD></TR><TR><TD CLASS="quote">
vented valvecover, etc...</TD></TR></TABLE>
Is that when I see the 2 large hoses tapped into the front of the valve cover? I always assumed that was for a catch tank.
vented valvecover, etc...</TD></TR></TABLE>
Is that when I see the 2 large hoses tapped into the front of the valve cover? I always assumed that was for a catch tank.
Honda-Tech Member
Joined: Jan 2004
Posts: 10,629
Likes: 1
From: Further down the spiral, TX, usa
Re: Skunk2 Head (::-::NirVTEC::-::)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ::-::NirVTEC::-:: »</TD></TR><TR><TD CLASS="quote">
Is that when I see the 2 large hoses tapped into the front of the valve cover? I always assumed that was for a catch tank.
</TD></TR></TABLE>
Yep, people usually do it if they rev higher than stock or have some kind of forced induction. The catch can is usually inline with the PCV valve, but they use them on the VC also..
Is that when I see the 2 large hoses tapped into the front of the valve cover? I always assumed that was for a catch tank.
</TD></TR></TABLE>
Yep, people usually do it if they rev higher than stock or have some kind of forced induction. The catch can is usually inline with the PCV valve, but they use them on the VC also..
Thread Starter
Joined: Jul 2004
Posts: 6
Likes: 0
From: Kelowna, BC
Re: Skunk2 Head (Hawkze_2.3)
Sure start with a 70mm throttle body then the intake manifold 2 way valve springs oversized valves titanium seats and retainers got the head ported, stage 2 cams, came gears and fuel rail I think that is basically everything I am doing to the top end
Trending Topics
Honda-Tech Member
Joined: Mar 2002
Posts: 5,000
Likes: 1
From: Phoenix, AZ
Re: Skunk2 Head (Andrew J)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Andrew J »</TD></TR><TR><TD CLASS="quote">no nawwzzz not for me </TD></TR></TABLE>
Sissy!
j/k
How can you say no to an extra 50-80whp for $500?!?!
Sissy!
j/kHow can you say no to an extra 50-80whp for $500?!?!
Thread
Thread Starter
Forum
Replies
Last Post
jeffk182
Honda Civic / Del Sol (1992 - 2000)
16
Jan 26, 2005 07:17 PM
juicedh22
Honda Prelude
5
Jun 17, 2004 08:14 PM
