gonzo


Modified by The Lobster at 8:34 PM 5/6/2007


Modified by The Lobster at 12:46 PM 5/27/2007

 

Where are u located at?
Im intrested in the tranny if Si.
Headers if it had any .
and the cluster.
e-mail at jenersnieves_31@hotmail.com

 

it has the Si tranny but for now i am not selling that my motor is still in the car.

no header was turbo

and cluster i can do 40 shipped. plus paypal fees.

morgantown, wv 26505

 

Interested in both fenders, both door skins (no glass, etc) and rear quarters (at least the pass side) shipped to 55419. Thanks.

 

my passenger side fender is messed up so thats a no go. driver side is perfect.

the doors are on hold someone local may take them off of me. and umm i dont really know how to take rear quarters...you want me to sawall theM?

 

Just the pass side quarter. I only need about 5 inches from the top of the arch all the way around.

 

well...i dont think i would want to do that...as i would need to find a sawall and i have no clue what i am doing...

if you were close i would of let you have it for cheap if you did it yourself...

im sorry i cant help you there.

 

bumperoni

 

IF IT IS A 91 SI...
How much for both front calipers, no pads lines or rotors needed?
Thanks!

 

If the cluster isn't sold, I'm interested in that as well as the cluster surround (switches and all).

 

i was interested in the climate control if its not broken or sold.

 

I was interested in the glovebox if its not broken.

 

Driver side fender, shipped to fayetteville, nc 29304? PM please, very interested and paypal ready!

 

bump for reply

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by racerman50 &raquo;</TD></TR><TR><TD CLASS="quote">IF IT IS A 91 SI...
How much for both front calipers, no pads lines or rotors needed?
Thanks!</TD></TR></TABLE>

id have to get back to you on this as i may need the brakes because my drive way is on a hill and i need to stop it somehow so they can tow it out of there.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eclecticteg21 &raquo;</TD></TR><TR><TD CLASS="quote">Driver side fender, shipped to fayetteville, nc 29304? PM please, very interested and paypal ready!</TD></TR></TABLE>

ummm 75 shipped? box is going to be sorta big to put fender in... .25+3% paypal fees do you need the molding on that too?


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by james_c._78 &raquo;</TD></TR><TR><TD CLASS="quote">I was interested in the glovebox if its not broken.</TD></TR></TABLE>

id have to double check on that if its busted what do you need just the shell?


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rexracer626 &raquo;</TD></TR><TR><TD CLASS="quote">i was interested in the climate control if its not broken or sold.</TD></TR></TABLE>

busted


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dplatt &raquo;</TD></TR><TR><TD CLASS="quote">If the cluster isn't sold, I'm interested in that as well as the cluster surround (switches and all).

</TD></TR></TABLE>

the surround has a small crack near the bottom, but cluster, switches, surround 50 shipped +.25+3%paypal if by paypal

 

How much for the rear defroster/rheostat combo switch?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Targa250R &raquo;</TD></TR><TR><TD CLASS="quote">How much for the rear defroster/rheostat combo switch?</TD></TR></TABLE>

guy above you may be interested in teh whole thing so ill get back at you.

 

You could do it like I did a car when I was in NC: just let it roll into the corner of the garage!
If you can figure a way my NASA H4 CRX will thank you.
Best of luck,
David

 

i need the corners real bad_ pm me with price shipped to 19711 DE

 

Hey do you sitll have the d16a6 that it comes with. Were are you located? How much, or i need just the head intake manifold and throttle body. would prefer the whole motor, but need parts.

 

do you have the factory floormats

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Panda Man &raquo;</TD></TR><TR><TD CLASS="quote">do you have the factory floormats</TD></TR></TABLE>

sold the passenger side already for 85

still have drive rside but its nto the greatest condition its missing the C.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 89crxsiVT &raquo;</TD></TR><TR><TD CLASS="quote">Hey do you sitll have the d16a6 that it comes with. Were are you located? How much, or i need just the head intake manifold and throttle body. would prefer the whole motor, but need parts.</TD></TR></TABLE>

i only have the block sold the head/IM alreayd sorry.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blue-EM1 &raquo;</TD></TR><TR><TD CLASS="quote">i need the corners real bad_ pm me with price shipped to 19711 DE</TD></TR></TABLE>

pmmed

 

my friend is interested in the hole interior minus seats... e-mail him suprastar94@yahoo.com

 

I cant see the pictures but do you have the stock si alloys ??

 

wow peopel really dig far in the for sale.