2003 SDG Speed Mini, many upgrades,12 inch front wheel, new 125cc motor, etc $15
Thread Starter
Honda-Tech Member
Joined: Nov 2005
Posts: 1,566
Likes: 0
From: Raal EE, ENNSEE
2003 SDG Speed Mini, many upgrades,12 inch front wheel, new 125cc motor, etc $1500
Here is my 2003 SDG speed mini. i am the second owner and i bought it used for $1500 in all stock form. i have since done a few upgrades.
-12 inch black front wheel
-New wave rotor on front
-yokahama shinko tires(about 50% life left)
-Big Gun Evo Mini exhaust system
-Protaper Handle Bar pad
-gold anodized gas tank vent cap
-Renthal Dual Compound Grips
-Uni Filter Air Filter
-Sikk Mx 125 cc motor (almost brand new)
-New footpegs (not installed)
-white side number plates
-Bigger rear pitster pro shock with reservoir
Sorry its a little dirty but i will take new pictures of the bike in the daylight when it is clean if requested
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
The bike runs great and i have no problems. Starts on first kick most of the time even when its like 40 degrees outside. Brakes work very well, and both front and rear are hydraulic disks. the motor was replaced because i bent the valves in the old motor and at the time i couldnt find replacements(they make them now) the old motor will be included in the sale. it has a manual clutch and four gears, 1 down, three up just like your big bike. this bike has a ton of torque and will wheelie in first, second, and third gear. oil is changed regularly and is only on the third change since the new motor was installed. i change it about every second or third long/hard ride. the stock left foot peg is bent but new ones for both sides will be included in the sale just not installed. bike has a cone style filter and a uni filter which are both included. i also have a set of 10 inch street tires that are in good condition that are included with the bike. the exhaust is a big gun system and it sounds almost like a 250f
i have about $2200 invested
Asking $1400 o.b.o.
post or pm me with any questions you may have, im not looking to trade but so me what you got i may be interested
thanks
Modified by alex_s817 at 10:24 PM 4/30/2007
-12 inch black front wheel
-New wave rotor on front
-yokahama shinko tires(about 50% life left)
-Big Gun Evo Mini exhaust system
-Protaper Handle Bar pad
-gold anodized gas tank vent cap
-Renthal Dual Compound Grips
-Uni Filter Air Filter
-Sikk Mx 125 cc motor (almost brand new)
-New footpegs (not installed)
-white side number plates
-Bigger rear pitster pro shock with reservoir
Sorry its a little dirty but i will take new pictures of the bike in the daylight when it is clean if requested
[IMG]
[/IMG] [IMG]
[/IMG] [IMG]
[/IMG] The bike runs great and i have no problems. Starts on first kick most of the time even when its like 40 degrees outside. Brakes work very well, and both front and rear are hydraulic disks. the motor was replaced because i bent the valves in the old motor and at the time i couldnt find replacements(they make them now) the old motor will be included in the sale. it has a manual clutch and four gears, 1 down, three up just like your big bike. this bike has a ton of torque and will wheelie in first, second, and third gear. oil is changed regularly and is only on the third change since the new motor was installed. i change it about every second or third long/hard ride. the stock left foot peg is bent but new ones for both sides will be included in the sale just not installed. bike has a cone style filter and a uni filter which are both included. i also have a set of 10 inch street tires that are in good condition that are included with the bike. the exhaust is a big gun system and it sounds almost like a 250f
i have about $2200 invested
Asking $1400 o.b.o.
post or pm me with any questions you may have, im not looking to trade but so me what you got i may be interested
thanks
Modified by alex_s817 at 10:24 PM 4/30/2007
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
