hey guys

Just ran my PB of a 10.8@130.22mph with a 1.770 60ft

Thanks John from M&H on making a great tyre :D
I was running the 26x10.5x15 M&H cheater DOT slick, damn tall tyres had to change the gearing in the gearbox. They hooked up very well, prob could of gotten a better time with a higher launch rpm but I cant run another 10 or else i'll have to put a cage into the car.

Anyone else tried these tyres?


Modified by bazda at 9:19 PM 5/1/2007


Modified by bazda at 9:19 PM 5/1/2007

 

good job

what does your car weigh ?

 

Good job.

Cunha from CLM went 10.2s on them a year or so ago.

 

nice

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bazda &raquo;</TD></TR><TR><TD CLASS="quote">hey guys

Just ran my PB of a 10.8@130.22mph with a 1.770 60ft

Thanks John from M&H on making a great tyre :D
I was running the 26x10.5x15 M&H cheater DOT slick, damn tall tyres had to change the gearing in the gearbox. They hooked up very well, prob could of gotten a better time with a higher launch rpm but I cant run another 10 or else i'll have to put a cage into the car.

Anyone else tried these tyres?</TD></TR></TABLE>

Good Job bazda. It feels good to hook up don't it.

John
M&H

 

you ran this on your toyota? What kind of times are guys pulling with these tires on our FWD's? These are the power street legal tires right John? Are these going to be quicker then the 235 drag radials?

Very nice time btw Congrats man

 

car weighs 2424lbs (1100kg) without me in it.
Its heavy cos its my street car so i cant gut teh crap out of it.

 

yes a toyota, im sure i can get the 60fts down as i am only allowed to do 1x 10 sec pass and i didnt really have my launch rpm high enough it was 5k and i did a 11.0 flat then i went to 5300 and did the 10, but then i couldnt do it again lol, if i do another one i will have to cage the car and I dont want to as I use it on the street all the time, road trips etc, used to drive it to uni every day haha.

Oh i also hold the record now i just found out for fastest fwd turbo street car in australasia.





more pics of the engine etc here
http://www.cardomain.com/ride/2131056/



Modified by bazda at 3:17 AM 4/30/2007

 

7agte? 1.8 liter I presume?

 

what psi in the tires?

 

dam those look huge on your car. Almost looks like you ps them on there. Good times.

 

yes 7agte 1.8L turbo
stock 20v toyota head just with upgraded valve springs.

The M&H look pretty big in that pic as they were pupmed up heaps to drive on the road, but I ran 8psi at the drags and it felt pretty good there, car was moving a bit at the end of the straight so i didnt want to lower the pressures anymore.

They do look PS lol, they dont look to bad once i raise the rear end to get it level.

 

In the the US there is no such thing as a 1.8 liter. Was yours factory 1.8 or was it a 7AFE block with a 20valve GE head?

 

Yes its a 7afre crank and block with a 20v black top GE head mated to it and the cc rating is actually 1764cc . But im getting new pistons made soon so will bore it out a bit more and bring it into 1800cc maybe a bit more.

 

Whats your eighth mile time.

 

7.108 @ 104.25mph

 

I used M&H for the first time this past week and what a difference! They Hook!!!!

 

 

Bazda: nice pics.

John
M&H