i have a 96 prelude s with the f22 i just fried some rings and bearings inside the engine been boosting for awhile, i am in the process of tearing the motor apart to see what i need to replace exactly but i am having a hard time finding any f22 forged pistons and rods or any internals like bearings and such that are for boosted f22's does anyone who has done a build have a website or know where i can find these things?

 

Check the links in the Accord FAQ (at the bottom of the first post). There's a site dedicated to F22 parts, http://www.f22parts.com, and there's a few other sites. Most sites do not list items for the F22, even though they have them or can get them.

Contact companies that make forged pistons and as them what's available for your motor.

 

http://raceeng.com/pc-7911-55-....aspx

these are wiseco .020 overbores

rods are the same as h23's

 

Start reading up on Bizimoto... the guy is a shear genius when it comes to the F22

 

I responded to this thread in the forced induction forum... I put my 2 cents in there.

dont bother with f22parts... they are overpriced and I have yet to hear much good about them. Race engineering is a pretty good place though.

 

thanks for the info guys. y aff2 parts from what i saw is way overpriced for their stuff, and race engineering i have tried but i couldnt figure it out. this is my first time dealing with the specifics of the engine i was wanting to put this off for as long as a good so i could learn about it more but now i have to pick up the pace, thanks again for the help