help/opinions! rims or piston&rod
Thread Starter
Honda-Tech Member
Joined: Aug 2005
Posts: 458
Likes: 0
From: st. paul, mn, us
help/opinions! rims or piston&rod
okay honda-tech. i dont know what to do so i need your help. i have a d16z6. i want to buy some pistons(vitara) and rods(eagles) which will cost me over 500. or should i buy my rims which is rota gird 16" with tires for 850? i want the look but i also want the speed. i got a home made turbo kit from my brother which he ran 14.2 with slicks stock motor with a chip ecu. what will you guys do if it was you.
Thread Starter
Honda-Tech Member
Joined: Aug 2005
Posts: 458
Likes: 0
From: st. paul, mn, us
Re: help/opinions! rims or piston&rod (MR.johnson)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MR.johnson »</TD></TR><TR><TD CLASS="quote">sell the D.
build a B.
</TD></TR></TABLE>
build a B.
</TD></TR></TABLE>
Thread Starter
Honda-Tech Member
Joined: Aug 2005
Posts: 458
Likes: 0
From: st. paul, mn, us
Re: help/opinions! rims or piston&rod (MR.johnson)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MR.johnson »</TD></TR><TR><TD CLASS="quote">sell the D.
build a B.
</TD></TR></TABLE>
dont want to. a d could do the work already!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SpeedoKing »</TD></TR><TR><TD CLASS="quote">i would do pistons and rods. this allows you to be able to do a hell of a lot more to your car later down the road.</TD></TR></TABLE>
i guess i estimate and i would be spending about 700 for just building the block and then i can boost it with a higher boost and tune it up!
will like more opinions! thank you!
build a B.
</TD></TR></TABLE>
dont want to. a d could do the work already!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SpeedoKing »</TD></TR><TR><TD CLASS="quote">i would do pistons and rods. this allows you to be able to do a hell of a lot more to your car later down the road.</TD></TR></TABLE>
i guess i estimate and i would be spending about 700 for just building the block and then i can boost it with a higher boost and tune it up!
will like more opinions! thank you!
Honda-Tech Member
Joined: Jan 2006
Posts: 10,443
Likes: 2
From: Rochester, New York -> Santa Clara, CA
Screw them, D power FTW.
B's for people who need to compensate
.
Get the rods/pistons, then you can push it harder w/ the turbo that you already have and whoop the **** out of any stock I/H/E B around...
I mean w/o boring/sleeving 'n **** you can't go all out, but you can still up the ante on the boost more than you can w/ stock pistons/rods.
B's for people who need to compensate
.Get the rods/pistons, then you can push it harder w/ the turbo that you already have and whoop the **** out of any stock I/H/E B around...
I mean w/o boring/sleeving 'n **** you can't go all out, but you can still up the ante on the boost more than you can w/ stock pistons/rods.
Thread Starter
Honda-Tech Member
Joined: Aug 2005
Posts: 458
Likes: 0
From: st. paul, mn, us
Re: (Syndacate)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Syndacate »</TD></TR><TR><TD CLASS="quote">Screw them, D power FTW.
B's for people who need to compensate.
Get the rods/pistons, then you can push it harder w/ the turbo that you already have and whoop the **** out of any stock I/H/E B around...
I mean w/o boring/sleeving 'n **** you can't go all out, but you can still up the ante on the boost more than you can w/ stock pistons/rods.
</TD></TR></TABLE>
your right! cant do much with out boring the block and sleeving it but it will allow me to boost more and whoop other swap out there. i just looks can come later.
B's for people who need to compensate
.Get the rods/pistons, then you can push it harder w/ the turbo that you already have and whoop the **** out of any stock I/H/E B around...
I mean w/o boring/sleeving 'n **** you can't go all out, but you can still up the ante on the boost more than you can w/ stock pistons/rods.
</TD></TR></TABLE>
your right! cant do much with out boring the block and sleeving it but it will allow me to boost more and whoop other swap out there. i just looks can come later.
Trending Topics
Re: (Syndacate)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Syndacate »</TD></TR><TR><TD CLASS="quote">Screw them, D power FTW.
B's for people who need to compensate.
Get the rods/pistons, then you can push it harder w/ the turbo that you already have and whoop the **** out of any stock I/H/E B around...
I mean w/o boring/sleeving 'n **** you can't go all out, but you can still up the ante on the boost more than you can w/ stock pistons/rods.
</TD></TR></TABLE>
B's for people who need to compensate
.Get the rods/pistons, then you can push it harder w/ the turbo that you already have and whoop the **** out of any stock I/H/E B around...
I mean w/o boring/sleeving 'n **** you can't go all out, but you can still up the ante on the boost more than you can w/ stock pistons/rods.
</TD></TR></TABLE>
Cool Cool Island Breezes. BOY-EE
iTrader: (1)
Joined: Sep 2006
Posts: 11,953
Likes: 9
From: TRILLINOIS....WAY downtown, jerky.
Re: help/opinions! rims or piston&rod (MR.johnson)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MR.johnson »</TD></TR><TR><TD CLASS="quote">sell the D.
build a B.
</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Syndacate »</TD></TR><TR><TD CLASS="quote">Screw them, D power FTW.
B's for people who need to compensate .
Get the rods/pistons, then you can push it harder w/ the turbo that you already have and whoop the **** out of any stock I/H/E B around...
I mean w/o boring/sleeving 'n **** you can't go all out, but you can still up the ante on the boost more than you can w/ stock pistons/rods.
</TD></TR></TABLE>
LOL sorry our weak *** I/H/E B motors cant keep up with BUILT TURBO D motors. Also, B series guys ARE compensating. For the lack of power and excitement they got from their D series.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Vt3c_eg »</TD></TR><TR><TD CLASS="quote">okay honda-tech. i dont know what to do so i need your help. i have a d16z6. i want to buy some pistons(vitara) and rods(eagles) which will cost me over 500. or should i buy my rims which is rota gird 16" with tires for 850? i want the look but i also want the speed. i got a home made turbo kit from my brother which he ran 14.2 with slicks stock motor with a chip ecu. what will you guys do if it was you. </TD></TR></TABLE>
14.2 with a turbo and slicks?!! DAMN!! My B16 I/H/E intake manifold 99 hatch ran 14.0
on all season street tires . But then again, Im all up in the midwest, bitches. lol 600ft elevation and 93 octane.
Edit: OMG nevermind, the op is from the midwest too. Dude...if you're talking 14.2 with slicks and a turbo....nevermind i'll just stop there.
build a B.
</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Syndacate »</TD></TR><TR><TD CLASS="quote">Screw them, D power FTW.
B's for people who need to compensate .
Get the rods/pistons, then you can push it harder w/ the turbo that you already have and whoop the **** out of any stock I/H/E B around...
I mean w/o boring/sleeving 'n **** you can't go all out, but you can still up the ante on the boost more than you can w/ stock pistons/rods.
</TD></TR></TABLE>
LOL sorry our weak *** I/H/E B motors cant keep up with BUILT TURBO D motors. Also, B series guys ARE compensating. For the lack of power and excitement they got from their D series.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Vt3c_eg »</TD></TR><TR><TD CLASS="quote">okay honda-tech. i dont know what to do so i need your help. i have a d16z6. i want to buy some pistons(vitara) and rods(eagles) which will cost me over 500. or should i buy my rims which is rota gird 16" with tires for 850? i want the look but i also want the speed. i got a home made turbo kit from my brother which he ran 14.2 with slicks stock motor with a chip ecu. what will you guys do if it was you. </TD></TR></TABLE>
14.2 with a turbo and slicks?!! DAMN!! My B16 I/H/E intake manifold 99 hatch ran 14.0
on all season street tires . But then again, Im all up in the midwest, bitches. lol 600ft elevation and 93 octane. Edit: OMG nevermind, the op is from the midwest too. Dude...if you're talking 14.2 with slicks and a turbo....nevermind i'll just stop there.
Thread
Thread Starter
Forum
Replies
Last Post
BigGreenAuto
Northern California (Sales)
21
Nov 30, 2006 05:27 AM