Hey Guys,
Finally motor is in....

Ive got 3 problems


Problem 1 :

Error code: 22 then became 21 ( i had a 22 error code which was Vtec wasn't hooked up or not working) I switched my Old Vtec Solenoid off my other ITR to the new One and it threw an Error code 21 which is Vtec Valve


I heard speed sensor if its not working properly my vtec wont engage but everything seems to be ok


Problem 2

Also my cars giving me an Error code 36...traction control on JDM ECU how do i get that to turn off


Lastly, theres a hose thats on the Intake manifold at the very right bottom i don't know where that hose conects to on the firewall?


Cars idling a little funny cause the dumbasses at the other place didn't give me the right computer thankfully i have my oldcomputer Nick chipped for me...


Any idea if nick could rechip / retune it? and how much just for the ecu to adjust the fuel etc and the idle cause the idle is going up and down ever so often....

We also broke the TPS plug ( the one that plugs into the TPS)
but it seems to be ok cause the prongs were there and everything just the covering sanpped off and we just rewired it.
If anybody could help out