I am trying to get off the passenger side, is it reverse thread? i have been usingeverything except an impact wrench and it has barely moved if at all

 

in order to safety the nut, you are supposed to dent the top of it in to a notch on the axle. if you don't un-dent the nut, you'll have a very hard time getting it off.

 

i disagree that metal is very soft. not that i did not open up the divot

 

have you used a breaker bar? thats how we got mine off. i was pushing on the breaks while my friend loosened the nut.

 

hit the brakes and use a breaker bar .. you'll get more torque from it. and you might need to extened the handle of the bar

 

was it like a 5 foot breaker.

 

 

when the axle nuts get overtightened not even a braker bar will do it you will snap off the 1/2 inch head of the braker bar.... the only way you will get it off is with an impact wrench.. trust me has happened to me twice broke my braker bar and 2 ratchets...

 

^^^That image cracks me up. It reminds me of when I almost broke my hand....

I used a bar just like that when my ratchet just snapped. Shew it was a close one. Anyways, I remember taking my Craftsman ratchet back to sears....
Salesman"hello how can I help you"
Me"I broke my ratchet and I am needing to replace it"
"Ok, wow our ratchets are hard to break, did you use a cheater bar"
"hmmm, no..."
"Ok, just making sure...heres your new ratchet"

The whole time I have a brace on my hand..haha

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by harmonator84 &raquo;</TD></TR><TR><TD CLASS="quote">

The whole time I have a brace on my hand..haha</TD></TR></TABLE>

Lol, FTW!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by harmonator84 &raquo;</TD></TR><TR><TD CLASS="quote">^^^That image cracks me up. It reminds me of when I almost broke my hand....

I used a bar just like that when my ratchet just snapped. Shew it was a close one. Anyways, I remember taking my Craftsman ratchet back to sears....
Salesman"hello how can I help you"
Me"I broke my ratchet and I am needing to replace it"
"Ok, wow our ratchets are hard to break, did you use a cheater bar"
"hmmm, no..."
"Ok, just making sure...heres your new ratchet"

The whole time I have a brace on my hand..haha</TD></TR></TABLE>

you speak the truth same thing happen to me... im hanging from my craftsman rachet and snap and i go down like a weezle....thats **** cracks me up

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ALLMOTOR CRX &raquo;</TD></TR><TR><TD CLASS="quote">you speak the truth same thing happen to me... im hanging from my craftsman rachet and snap and i go down like a weezle....thats **** cracks me up </TD></TR></TABLE>
The sad part is that I still do it..haha.
I mean its really the only way to remove it. I guess you just have to trust your craftsman.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by harmonator84 &raquo;</TD></TR><TR><TD CLASS="quote">
The sad part is that I still do it..haha.
I mean its really the only way to remove it. I guess you just have to trust your craftsman.</TD></TR></TABLE>

oh no its not the only way to do it.... just turn on your compressor and connect your impact and simply press the triger... that **** will not punk you out.....

 

I am going to try and break my torque wrench now.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ALLMOTOR CRX &raquo;</TD></TR><TR><TD CLASS="quote">oh no its not the only way to do it.... just turn on your compressor and connect your impact and simply press the triger... that **** will not punk you out..... </TD></TR></TABLE>
Well when you dont have a compressor to turn on it makes it alittle harder.

I am working on getting one though.

 

hahaha, I hope I dont need to use an impact on mine, or else that means I gotta have a shop do it. I think he needs to know another good way to get that bitch loose without an impact. im gonna use a 25'' cheater with a 4 ft pipe from my floor jack

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by msinsky14 &raquo;</TD></TR><TR><TD CLASS="quote">hahaha, I hope I dont need to use an impact on mine, or else that means I gotta have a shop do it. I think he needs to know another good way to get that bitch loose without an impact. im gonna use a 25'' cheater with a 4 ft pipe from my floor jack </TD></TR></TABLE>
****...
Naa you dont need a impact. I mean it would be easyer, but I have done it 20935203958 times without one.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by msinsky14 &raquo;</TD></TR><TR><TD CLASS="quote">hahaha, I hope I dont need to use an impact on mine, or else that means I gotta have a shop do it. I think he needs to know another good way to get that bitch loose without an impact. im gonna use a 25'' cheater with a 4 ft pipe from my floor jack </TD></TR></TABLE>


haha thats what i did on mine see pic above lol

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by harmonator84 &raquo;</TD></TR><TR><TD CLASS="quote">The sad part is that I still do it..haha.
I mean its really the only way to remove it. I guess you just have to trust your craftsman.</TD></TR></TABLE>

Hahaahh that cracks me up.
That's why i just stand on the bar

 

yea I hear standing on the pipe will remove it, or maybe just bounce up and down on it maybe

 

91ed9 did you get a good deal on the All-in-one Two piece toilet..haha.
I have to say I have never seen a toilet carboard used

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by harmonator84 &raquo;</TD></TR><TR><TD CLASS="quote">91ed9 did you get a good deal on the All-in-one Two piece toilet..haha.
I have to say I have never seen a toilet carboard used</TD></TR></TABLE>

yea but dont buy it the seat is to small and you have to kinda tuck your ***** down

highly uncomfertable (unless your skiny and/or have a tinny *****!)

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by harmonator84 &raquo;</TD></TR><TR><TD CLASS="quote">
Salesman"hello how can I help you"
Me"I broke my ratchet and I am needing to replace it"
"Ok, wow our ratchets are hard to break, did you use a cheater bar"
"hmmm, no..."
"Ok, just making sure...heres your new ratchet"</TD></TR></TABLE>

I just tell them i was tightening my little brothers bicycle seat and it broke..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91ed9 &raquo;</TD></TR><TR><TD CLASS="quote">yea but dont buy it the seat is to small and you have to kinda tuck your ***** down

highly uncomfertable (unless your skiny and/or have a tinny *****!)</TD></TR></TABLE>
LMAO!!! Well I guess thats the perfect libatory for me..haha
Does that toliet flush without leaving streaks around the bowl? The one I have now everytime I flush leaves these brown marks all in it. Idk where its coming from..haha

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91ed9 &raquo;</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>

i wouldnt do that. you could risk breaking your lugs. just have someone step on the brake pedal. i too have broken a ratchet trying to take this nut off. impact gun would be nice but not everyone has one. breaker bar should work just fine.