Front Upper Arm Bracket Brace

After time of wear and tear, the OEM front upper arm bracket welding will start to peel off causing hazardous conditions during strenuous driving. To compensate for such occurrences JUN Auto has create the 'Front Upper Arm Bracket Brace'.

Reinforced Rear Sub-Frame

Though the Honda S2000 has a rear sub-frame which is vertically long in structure and the point of control arms that were installed far from the main frame, rigidity isn't being taken into consideration. The suspension doesn't fulfill its purpose due to the sub-frame getting twisted when using high grip tires or during circuit racing. With JUN Auto's new Reinforced Rear Sub-Frame, the Honda S2000's rear sub-frames weaknesses are eliminated while keeping the OEM design.

<U>This thread is for informational purpose only. See below for inquiries.</U>
*For pricing inquiries please contact forum vendors
*For general information please contact info@more-japan.com

 

^^^it's probably a lot of work to install that huh?

 

i have a set of the front upper arm brackets on order for my s2000. i think i am paying about $300 or so with shipping. wish i could afford the rear sub frame.

 

2390.00 for the subframe, damn.

 

well i'm sure you could sell the stock one for $1k or so? I don't know who would need one buttt yeah lol

 

damn,

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tanabe USA &raquo;</TD></TR><TR><TD CLASS="quote">
Front Upper Arm Bracket Brace

After time of wear and tear, the OEM front upper arm bracket welding will start to peel off causing hazardous conditions during strenuous driving. To compensate for such occurrences JUN Auto has create the 'Front Upper Arm Bracket Brace'.

</TD></TR></TABLE>

can honda engineers (after 7 years of R&d) still not figure that out? this is a legit question... btw

 

i'd like to see pix of these installed. can you post pix please?

thanks

 

JUN are the best

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cb7tougeracer &raquo;</TD></TR><TR><TD CLASS="quote">JUN are the best</TD></TR></TABLE>

the best at what?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cmdr430 &raquo;</TD></TR><TR><TD CLASS="quote">

the best at what?</TD></TR></TABLE>

at marketing overpriced junk

 

The best at making some nasty *** cams for Skylines?
http://videos.streetfire.net/s...f.htm

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by M3BimmerBilly &raquo;</TD></TR><TR><TD CLASS="quote">

at marketing overpriced junk</TD></TR></TABLE>

yes, sir!

i want pics of the ///M now!