is there a way to identify the heads of b series engines??
Ek Forever y0!
Joined: May 2005
Posts: 16,712
Likes: 9
From: Beating people with a stick, GA
Re: is there a way to identify the heads of b series engines?? (KdiZzLe)
should be a stamp on the back.
There should also be some identification on the pistons.
Modified by ek forever guy at 4:29 PM 3/31/2007
There should also be some identification on the pistons.
Modified by ek forever guy at 4:29 PM 3/31/2007
Honda-Tech Member
Joined: Dec 2004
Posts: 5,473
Likes: 1
From: Orlando, FL
Re: is there a way to identify the heads of b series engines?? (ek forever guy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ek forever guy »</TD></TR><TR><TD CLASS="quote">should be a stamp on the back.
IThere should also be some identification on the pistons.</TD></TR></TABLE>
not sure about the pistons identifying the head, and i thought the stamps are in the front on the exhaust side.
IThere should also be some identification on the pistons.</TD></TR></TABLE>
not sure about the pistons identifying the head, and i thought the stamps are in the front on the exhaust side.
Honda-Tech Member
Joined: Dec 2004
Posts: 5,473
Likes: 1
From: Orlando, FL
Re: (pdiggitydogg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pdiggitydogg »</TD></TR><TR><TD CLASS="quote">years are on the "front" (exhaust side)
ID # is on the "back" (intake side)
</TD></TR></TABLE>
thanks for clearing that up!
ID # is on the "back" (intake side)
</TD></TR></TABLE>
thanks for clearing that up!
Trending Topics
Honda-Tech Member
Joined: Apr 2004
Posts: 369
Likes: 1
From: Mexicali, B.C., Mexico
Re: is there a way to identify the heads of b series engines?? (JJSpecTuning)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JJSpecTuning »</TD></TR><TR><TD CLASS="quote">
no, you're wrong
P72 is GSR
PR3 is B16/ITR</TD></TR></TABLE>
P72 is also the jdm itr 96-97 i think
no, you're wrong
P72 is GSR
PR3 is B16/ITR</TD></TR></TABLE>
P72 is also the jdm itr 96-97 i think
Honda-Tech Member
Joined: Apr 2002
Posts: 1,599
Likes: 0
From: somewhere out there, CA
Re: is there a way to identify the heads of b series engines?? (gato5254)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gato5254 »</TD></TR><TR><TD CLASS="quote">
P72 is also the jdm itr 96-97 i think</TD></TR></TABLE>
no, itr should come with a p30 head
P72 is also the jdm itr 96-97 i think</TD></TR></TABLE>
no, itr should come with a p30 head
Ek Forever y0!
Joined: May 2005
Posts: 16,712
Likes: 9
From: Beating people with a stick, GA
Re: is there a way to identify the heads of b series engines?? (spoon_ek9)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spoon_ek9 »</TD></TR><TR><TD CLASS="quote">
no, itr should come with a p30 head</TD></TR></TABLE>
This is correct sir.
no, itr should come with a p30 head</TD></TR></TABLE>
This is correct sir.
Re: is there a way to identify the heads of b series engines?? (ek forever guy)
no no no
ALL itr heads usdm and jdm are stamped pr3 just like b16/b17 heads. ONLY gsr and sir-g heads are stamped p72.
ALL itr heads usdm and jdm are stamped pr3 just like b16/b17 heads. ONLY gsr and sir-g heads are stamped p72.
Honda-Tech Member
Joined: Jul 2005
Posts: 4,286
Likes: 2
From: Land of Entrapment
Re: is there a way to identify the heads of b series engines?? (abusedhusband)
Date:
All b-series heads after certain year have 30 on dizzy side above where the vtec solenoid goes.
But yes all non gsr heads have PR3 on them.
https://honda-tech.com/zerothread?id=1931239
All b-series heads after certain year have 30 on dizzy side above where the vtec solenoid goes.
But yes all non gsr heads have PR3 on them.
https://honda-tech.com/zerothread?id=1931239
Thread
Thread Starter
Forum
Replies
Last Post
turbo*s2k
Northern California (Sales)
13
Apr 20, 2007 07:11 PM
