Like the title says I have an F1spec Tri Y header, brand new. Header fits Bseries.

Let me know if your interested. 400 shipped.

Open for trades as well

Dyno by Zap, Spoon @ 166.4, and F1spec @ 169.6

169.60whp 110.43 ft-lbs
166.46whp 111.66 ft-lbs

camgears are at 0,0. same basemap.










Modified by YouvGotMail at 6:21 AM 3/28/2007


Modified by YouvGotMail at 6:23 AM 3/28/2007


Modified by youvgotmail at 6:29 PM 4/6/2007

 

https://honda-tech.com/zerothre...87161

everyone read this before you even consider this header... its fake from ebay for 200 bucks!

 

your an idiot, you go in all my threads to inform people?? Im sure everyone on honda-tech already knew. Stupid.

 

The thing is, I don't even know why you compare your f1spec header with the REAL Hytech header and saying THIS header you're selling is making 3 whp more than the Spoon header

Besides, this header isn't even made by Hytech..it is a COPY of Hytech's header and may or may not produce the same results

I'd say just go ebay it, you'll probably have better luck there.. at least I understand the business part of your thinking.

 

Dude the things you just said, I already know, and I think everyone else does.

I have stated in all my fs that this is a HyTech REPLICA, because it is. The design was originally from HyTech, and was copied by like 10 companies (rage, camp1320, etc)

The reason it WILL and does put down the same results, is because it came from the same factory HyTech produced their headers. This is a HyTech to the T, with the F1 badge in its place....and the flange holes were off.

This F1spec header put down 169, and the Spoon put 166.....so...yah..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by youvgotmail &raquo;</TD></TR><TR><TD CLASS="quote">Dude the things you just said, I already know, and I think everyone else does.

I have stated in all my fs that this is a HyTech REPLICA, because it is. The design was originally from HyTech, and was copied by like 10 companies (rage, camp1320, etc)

The reason it WILL and does put down the same results, is because it came from the same factory HyTech produced their headers. This is a HyTech to the T, with the F1 badge in its place....and the flange holes were off.

This F1spec header put down 169, and the Spoon put 166.....so...yah..</TD></TR></TABLE>

NO! the thread with Zap's dyno was a REAL HYTECH vs a REAL SPOON stop telling these lies.

 

I think there's some misunderstanding I guess

youvgotmail got his info from here
https://honda-tech.com/zerothre...87161
where the title says "thoughts on ebay tri-y"
So he thinks the Hytech headers that Zap uses are the knock offs

BUT if you search Zap's original post which is
https://honda-tech.com/zerothread?id=1756316&page=2

You can see Zap got his ORIGINAL Hytech header on 10/15/2006 which is way before the ebay craze about the f1spec copies, though he may have posted his dyno sheet on MArch 2007
Hope this clears up the confusion

 

damn where those for 200 bucks...

 

Yeah I see now, didnt realize it was the real HyTech.....alright well then think about this.....The way he posted his dynos, he made it seem like it was an F1spec header, he put it in there because people were asking for the F1spec results....Since he posted his HyTech results with the F1 actually in question, IMO I think he bought an F1spec and considers it to be the same thing, so he basically looked at the headers side to side which will again prove my point of it being identical.

No matter how you look at it, 400 towards this header is not a bad investment. People just dont want to buy it because im making money....lets see though...how do businesses make money...

 

pmd

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by youvgotmail &raquo;</TD></TR><TR><TD CLASS="quote">Yeah I see now, didnt realize it was the real HyTech.....alright well then think about this.....The way he posted his dynos, he made it seem like it was an F1spec header, he put it in there because people were asking for the F1spec results....Since he posted his HyTech results with the F1 actually in question, IMO I think he bought an F1spec and considers it to be the same thing, so he basically looked at the headers side to side which will again prove my point of it being identical.

No matter how you look at it, 400 towards this header is not a bad investment. People just dont want to buy it because im making money....lets see though...how do businesses make money...</TD></TR></TABLE>

I agree. Bottom line is if you see it for a better price, then get it. I don't think youvegotmail is claiming his is the best price out there. It may actually be cheaper through youvegotmail than if you bought it somewhere else after shipping, tax, etc. if you bought it somewhere else. Either way, if you find it for a better price, get it there.

 

Bump for you HATERS

 

Thanks for agreeing and bumping