im looking for an obd1 ecu... what kind of car do i need to look for to pull one out of???

 

any 92-95 civic or integra will be obd1 and it's ecu can be converted to be used with any number of engines.

 

will i have to get the ecu programmed?

 

obviously

 

obd1 ecu for which car/motor?

 

i have a 90 teg with b16a and im converting it to obd1 and i need to know what car i can go to and pull a ecu out of

 

u can use a p28 and get it chipped. p28 is a single cam vtec ecu.

 

is there a DOHC vtec obd1 ecu

 

if your car is obd0, then you can look for the jdm pr3 or pw0. The pr3 came out of the b16a DA's in Japan. If you wanted to run an obd1 dohc vtec ecu, then you can look for the p61, p30, chipped p28

 

yeah i have a pr3 already but i converting it to obd1... which is better p61 or p30

 

ttt

 

a p72 is a gsr ecu. but wats wrong with a p28. if u chip it it doesnt matter wat ecu it is.

 

p30 is the stock b16a ecu.

 

You are pretty much going to have to chip any ecu you get for your car. Even if you get a stock P30 (JDM OBD1 ecu) you will still have problems, unless you wire in a knock sensor (which almost noone does) and you will have to get the P30 chipped so that you dont always have the Check engine light on because there is no knock sensor. I would suggest either buying a US P28 or US P72 ecu and then getting it chipped for a B16. or you can buy a P05, P75 or P06 ecu and have the vtec components added to it and get it chipped with a good B16 program.

I can do the vtec conversions or the chipping for you if you need it. hit me up if you get an ecu and you want me to chip it or do the vtec conversion. I have lots of good programs for all kinds of setups from other cars I have tuned.