GT35r GSR Pump Gas tune (dyno chart)
Thread Starter
Honda-Tech Member
Joined: Jun 2002
Posts: 6,939
Likes: 2
From: Maryland, USA
GT35r GSR Pump Gas tune (dyno chart)
your basic GSR build. pistons, rods, springs, retainers, edelbrock manifold, T3 35r, AVCR, 3 inch dp and exhaust, hondata, 1000's, 3 bar.
low HP run is at 12psi, high is at 19psi. clutch is letting go so we arnt doing a racegas tune untill we get a twin disk in it.
we had a bunch of little issues with this thing...the manifold with a single 44 gate would boost spike like crazy. i added a 2nd 44 gate and we can get it to hold 9psi rock solid now which made about 320whp. as you can see from the number of dyno runs on the car...95% of those were pulls that ended at 4k rpm due to a computer issue i was having. Javier @ hondata is the man....with all the years ive been a hondata dealer i have never had anybody be a fraction as helpfull as him.
throw some slicks on it and its a 10 second pump gas daily driver
low HP run is at 12psi, high is at 19psi. clutch is letting go so we arnt doing a racegas tune untill we get a twin disk in it.
we had a bunch of little issues with this thing...the manifold with a single 44 gate would boost spike like crazy. i added a 2nd 44 gate and we can get it to hold 9psi rock solid now which made about 320whp. as you can see from the number of dyno runs on the car...95% of those were pulls that ended at 4k rpm due to a computer issue i was having. Javier @ hondata is the man....with all the years ive been a hondata dealer i have never had anybody be a fraction as helpfull as him.
throw some slicks on it and its a 10 second pump gas daily driver
Honda-Tech Member
Joined: Jun 2005
Posts: 1,470
Likes: 0
From: /\/\ |)
Re: GT35r GSR Pump Gas tune (dturbocivic)
nice, im hoping for almost the same thing out of my LS/V with sc61 once i throw some boost at it. im sure the customer is loving spinning 4th gear on street tires!! haha.
great work
edit: may i ask what compression ratio?? if you know it??
great work
edit: may i ask what compression ratio?? if you know it??
Thread Starter
Honda-Tech Member
Joined: Jun 2002
Posts: 6,939
Likes: 2
From: Maryland, USA
Re: GT35r GSR Pump Gas tune (whiteef8)
9:1 CP pistons
i actually made a little bit more power, but it started to not seem as happy on pump gas so i backed it back down. as soon as we get a twin disk in it i think we will hit up the track.
i actually made a little bit more power, but it started to not seem as happy on pump gas so i backed it back down. as soon as we get a twin disk in it i think we will hit up the track.
Thread Starter
Honda-Tech Member
Joined: Jun 2002
Posts: 6,939
Likes: 2
From: Maryland, USA
Re: GT35r GSR Pump Gas tune (spoolingb20)
i might have some engine bay pics if the owner of the car wants me to post them......its a T3 .63 E housing. thats all i know about the turbo, he did not purchase it through me.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Jun 2002
Posts: 6,939
Likes: 2
From: Maryland, USA
Re: (boosted k20)
when i had a 35 on my car it made 550@18psi. that whole combo worked out so well. 25psi was 616whp
this is this customers first turbo car so i think he will probably just want to get used to this power before we go and try to make any more. i think next weekend it should see the track, twin disk should be here on monday.
this is this customers first turbo car so i think he will probably just want to get used to this power before we go and try to make any more. i think next weekend it should see the track, twin disk should be here on monday.
Junior Member
Joined: Oct 2004
Posts: 168
Likes: 0
From: St. James, Barbados
Re: (RacerXI)
The power band seems VERY decent, and not too laggy at all. Sick pump gas setup.
What do you say to those who say the 35R is not a good daily/pump turbo, and that the 30R is way better?? How is the lag on the street? ON/OFF when it kicks in?
P.S. this is a RARE dyno chart of a .63AR 35R, i was waiting for a post like this to come along.
What do you say to those who say the 35R is not a good daily/pump turbo, and that the 30R is way better?? How is the lag on the street? ON/OFF when it kicks in?
P.S. this is a RARE dyno chart of a .63AR 35R, i was waiting for a post like this to come along.
Thread Starter
Honda-Tech Member
Joined: Jun 2002
Posts: 6,939
Likes: 2
From: Maryland, USA
Re: (fled)
i love 35s on b18's...i think the 30s are a better choice for a b16 though. ive done a few gt30r stock internal b16's that make over 300 on the stock map sensor. not too laggy either.
gt30r for b16
gt35r for b18
gt40r for h22
gt42r for spfwd
gt30r for b16
gt35r for b18
gt40r for h22
gt42r for spfwd
Joined: Jul 2003
Posts: 38,620
Likes: 0
From: Baltimore, MD
Re: (CoreyR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CoreyR »</TD></TR><TR><TD CLASS="quote">wow. how come all the good tuners are so far away 
</TD></TR></TABLE>
we arent thaaaaaaat far away
</TD></TR></TABLE>we arent thaaaaaaat far away
Honda-Tech Member
Joined: Nov 2003
Posts: 3,771
Likes: 0
From: Gettin sum, maryland
Re: (95dxb18c1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 95dxb18c1 »</TD></TR><TR><TD CLASS="quote">which is exactly why i will be coming to you guys again very soon</TD></TR></TABLE>
Honda-Tech Member
Joined: Aug 2004
Posts: 1,864
Likes: 1
Re: (BoostedJeff)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BoostedJeff »</TD></TR><TR><TD CLASS="quote">
we arent thaaaaaaat far away</TD></TR></TABLE>
6 1/2 hours isnt thaaaaaat close either.
we arent thaaaaaaat far away
</TD></TR></TABLE>6 1/2 hours isnt thaaaaaat close either.
