Pistons and rods for an ITR motor?
Thread Starter
Honda-Tech Member
Joined: Jun 2002
Posts: 7,942
Likes: 0
From: Destroying turbo ITR motors in Minneapolis, MN, U.S.A.
Pistons and rods for an ITR motor?
When ordering pistons and rods for a B18C5 (ITR motor, duh 
), can I run aftermarket pistons for a GSR motor? Or do I need ITR-specific pistons?
What about the rods? Can I just buy Eagle/Manley/whatever rods for a GSR crank, and run them on the ITR crank?
), can I run aftermarket pistons for a GSR motor? Or do I need ITR-specific pistons?What about the rods? Can I just buy Eagle/Manley/whatever rods for a GSR crank, and run them on the ITR crank?
Thread Starter
Honda-Tech Member
Joined: Jun 2002
Posts: 7,942
Likes: 0
From: Destroying turbo ITR motors in Minneapolis, MN, U.S.A.
Re: Pistons and rods for an ITR motor? (doood)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by doood »</TD></TR><TR><TD CLASS="quote">they use the same size rods and pistons</TD></TR></TABLE>
Size wasn't the issue. Piston design for the different heads is (GSR vs. ITR/B16 head).
Size wasn't the issue. Piston design for the different heads is (GSR vs. ITR/B16 head).
Thread Starter
Honda-Tech Member
Joined: Jun 2002
Posts: 7,942
Likes: 0
From: Destroying turbo ITR motors in Minneapolis, MN, U.S.A.
Re: Pistons and rods for an ITR motor? (boostincoupe)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mike@synapse motorsport »</TD></TR><TR><TD CLASS="quote">any gsr(94+) rods will work on an itr crank.
any forged piston will work on a gsr(94+)/itr.</TD></TR></TABLE>
Good to know. I'm using the yellow hatch you guys built as a springboard for build ideas.
https://honda-tech.com/zerothread?id=1832895
any forged piston will work on a gsr(94+)/itr.</TD></TR></TABLE>
Good to know. I'm using the yellow hatch you guys built as a springboard for build ideas.
https://honda-tech.com/zerothread?id=1832895
Joined: Oct 2004
Posts: 2,278
Likes: 0
From: upstate, ny
haha good choice. i should get you in touch with the customer for a tesitmonial. nothing but good things to say about it. if you have any questions just shoot them our way. hes coming back in a few weeks with some race gas well update it when we get some new numbers.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Jun 2002
Posts: 7,942
Likes: 0
From: Destroying turbo ITR motors in Minneapolis, MN, U.S.A.
Re: (mike@synapse motorsport)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mike@synapse motorsport »</TD></TR><TR><TD CLASS="quote">haha good choice. i should get you in touch with the customer for a tesitmonial. nothing but good things to say about it. if you have any questions just shoot them our way. hes coming back in a few weeks with some race gas well update it when we get some new numbers.
</TD></TR></TABLE>
Yeah definitely! Did you guys run ACL or OEM bearings on that setup? Also, I'll be running a GT3255E instead of the GT3076R...I'm not b3ller enough yet.
</TD></TR></TABLE>
Yeah definitely! Did you guys run ACL or OEM bearings on that setup? Also, I'll be running a GT3255E instead of the GT3076R...I'm not b3ller enough yet.
Thread
Thread Starter
Forum
Replies
Last Post
ricky05
Acura Integra
2
Feb 23, 2006 06:13 AM
93gsrcoupe
All Motor / Naturally Aspirated
5
Aug 5, 2004 07:54 PM
