fujitsubo header modification
Thread Starter
Joined: Oct 2006
Posts: 33
Likes: 0
From: los angeles, ca, usa
fujitsubo header modification
i bought this header used and i just sanded it up a little bit (still havee along way to go to get it the way i want) and i noticed that the b -pipe is gonna be short from the cat, and i did some searching and found out that the fujitsubo headers for the h22 come in 3 pieces. so i was wondering if i could cut the flange (which i think is a donut flange) off the b pipe and just weld on a straight 2.5" pipe from there until the cat and then use a flex pipe connector flange(2.5") to connect to the rest of the piping.
the donut flange on there now is 2.5".
here are some pics of the header to get a better idea of what im thinking about doing with the collector:
the donut flange on there now is 2.5".
here are some pics of the header to get a better idea of what im thinking about doing with the collector:
Honda-Tech Member
Joined: Apr 2006
Posts: 724
Likes: 0
Re: fujitsubo header modification (idrivealude)
If the collector size is 2.5" (donut flange) then why cut it off? Just get a muffler shop to either attach a pipe that fits the measurement for your car to the flange using bolts (recommended) or weld it on.
Nice looking header by the way. Can you do me a favor and measure the height of the B-pipe (in terms if it was attached to the car)?
l <-- This part
l__________
Thanks
-Moh
Nice looking header by the way. Can you do me a favor and measure the height of the B-pipe (in terms if it was attached to the car)?
l <-- This part
l__________
Thanks
-Moh
Honda-Tech Member
Joined: Dec 2004
Posts: 3,095
Likes: 1
From: Oklahoma City, OK, USA
Re: fujitsubo header modification (gotjnco)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gotjnco »</TD></TR><TR><TD CLASS="quote">bump anyone has the 3rd pipe???
please advise... I have the 2 man pieces but would be nice to see if anyone has that 3rd piece...
</TD></TR></TABLE>
already answered
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hamadiscool »</TD></TR><TR><TD CLASS="quote">If the collector size is 2.5" (donut flange) then why cut it off? Just get a muffler shop to either attach a pipe that fits the measurement for your car to the flange using bolts (recommended) or weld it on.</TD></TR></TABLE>
please advise... I have the 2 man pieces but would be nice to see if anyone has that 3rd piece...
</TD></TR></TABLE>
already answered
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hamadiscool »</TD></TR><TR><TD CLASS="quote">If the collector size is 2.5" (donut flange) then why cut it off? Just get a muffler shop to either attach a pipe that fits the measurement for your car to the flange using bolts (recommended) or weld it on.</TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post
