F/S: CP, Manley, Sleeved B18a block with Ge girdle (CHEAP)
Thread Starter
Honda-Tech Member
Joined: Jan 2001
Posts: 1,209
Likes: 0
From: nor cal, USA
F/S: CP, Manley, Sleeved B18a block with Ge girdle (CHEAP)
Hi,
Selling these following parts to get ready for the upcoming season...all items was used last season...if there is any questions, please Pm me.
CP pistons with Manley Rods.
83mm bore
10:1 compression on a GSR block (think it was like 9:6 in my LS block)
Has rings, but suggest new ones cause it's cheap to replace.
Manley turbo tuff rods made for 90-2001 LS block.
Need new bears cause again, it's cheap to replace.
1 rod has a stripped bolt, (asked a machine shop and it can be fixed with no problems) I have no idea why, only noticed it when I was taking it apart. My builder didn't mention anything about that to me when I bought it new from him.
B18a1 block (used to belong to a old school bay area racer's)
No cracks or anything, align-hone and ur set to go.
or bore it out to 84mm, currently it's 83mm.
Sleeved done by JG
Has crank in it, G.E. main girdle, ARP main studs, oil pump that has 10-15 pass on it, same with water pump.
***selling cause I got a kick *** deal on a new set up, why am I selling it like this? well frankly, it's easier to sell this way and so that ppl can rebuild with confidence***
Like I said b4, any questions, please PM me.
Rods and Pistons = $600
Block set up = $600
thanks
Mike
and the pics
Selling these following parts to get ready for the upcoming season...all items was used last season...if there is any questions, please Pm me.
CP pistons with Manley Rods.
83mm bore
10:1 compression on a GSR block (think it was like 9:6 in my LS block)
Has rings, but suggest new ones cause it's cheap to replace.
Manley turbo tuff rods made for 90-2001 LS block.
Need new bears cause again, it's cheap to replace.
1 rod has a stripped bolt, (asked a machine shop and it can be fixed with no problems) I have no idea why, only noticed it when I was taking it apart. My builder didn't mention anything about that to me when I bought it new from him.
B18a1 block (used to belong to a old school bay area racer's)
No cracks or anything, align-hone and ur set to go.
or bore it out to 84mm, currently it's 83mm.
Sleeved done by JG
Has crank in it, G.E. main girdle, ARP main studs, oil pump that has 10-15 pass on it, same with water pump.
***selling cause I got a kick *** deal on a new set up, why am I selling it like this? well frankly, it's easier to sell this way and so that ppl can rebuild with confidence***
Like I said b4, any questions, please PM me.
Rods and Pistons = $600
Block set up = $600
thanks
Mike
and the pics
Thread Starter
Honda-Tech Member
Joined: Jan 2001
Posts: 1,209
Likes: 0
From: nor cal, USA
Re: F/S: CP, Manley, Sleeved B18a block with Ge girdle (ALLphilthyDC2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ALLphilthyDC2 »</TD></TR><TR><TD CLASS="quote">bump for the homie! 
</TD></TR></TABLE>
Thanks Phil
</TD></TR></TABLE>Thanks Phil
Thread Starter
Honda-Tech Member
Joined: Jan 2001
Posts: 1,209
Likes: 0
From: nor cal, USA
Re: F/S: CP, Manley, Sleeved B18a block with Ge girdle (EKHB)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EKHB »</TD></TR><TR><TD CLASS="quote">Pmd</TD></TR></TABLE> All pm's replied...
Mike
Mike
Trending Topics
Honda-Tech Member
Joined: Apr 2005
Posts: 1,669
Likes: 1
From: Vacaville, CA, USA
Re: F/S: CP, Manley, Sleeved B18a block with Ge girdle (ludicrous)
bump it baby......bizzump....
i guess you are coming out with a sicker set up huh mike?.......
good luck for the 2007 season.
i guess you are coming out with a sicker set up huh mike?.......
good luck for the 2007 season.
Thread Starter
Honda-Tech Member
Joined: Jan 2001
Posts: 1,209
Likes: 0
From: nor cal, USA
Re: (t0ekn3e)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by t0ekn3e »</TD></TR><TR><TD CLASS="quote">baller mike good seller</TD></TR></TABLE>
nowhere near a baller...maybe a baller on a budget? haha
nowhere near a baller...maybe a baller on a budget? haha
Thread Starter
Honda-Tech Member
Joined: Jan 2001
Posts: 1,209
Likes: 0
From: nor cal, USA
Re: F/S: CP, Manley, Sleeved B18a block with Ge girdle (og asr)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by og asr »</TD></TR><TR><TD CLASS="quote">bump it baby......bizzump....
i guess you are coming out with a sicker set up huh mike?.......
good luck for the 2007 season.</TD></TR></TABLE>
Yea, Good luck to you also Randy...
I'm trying to catch up to ur level...
Mike
i guess you are coming out with a sicker set up huh mike?.......
good luck for the 2007 season.</TD></TR></TABLE>
Yea, Good luck to you also Randy...
I'm trying to catch up to ur level...
Mike
Junior Member
Joined: Nov 2004
Posts: 544
Likes: 0
From: Twin Falls Udahoe
Re: F/S: CP, Manley, Sleeved B18a block with Ge girdle (aafryf)
Pmed you again.... Cant seem to get a hold of you. I dont know it might be my computer it is acting funny. Let me know if you got it.
Thread
Thread Starter
Forum
Replies
Last Post
