nitrous h22 ek hatch questions
havent tracked this car yet but wondering what a reasonable time estimate would be and if anybody is running something similar. The car is a 00 hatch with a usdm h22 with the following mods
-rage header
-t1r mid pipe
-spoon axle back
-aem intake
-skunk 2 intake manifold
-stage 3 clutch
-gator racing stage 3 axles
now my question is with the following mods and a nice direct port set up running a 100 shot what kinda of whp numbers and 1/4 can i assume, car will be ran on a slick.
weight reduction on the car as follows
-no spare or jack
-no front rebar
-removed sway bars
-removed rear seats and panels
im gonna assume the car would make about 260-270whp on a 100 shot and weigh in at around 2350lbs.
-rage header
-t1r mid pipe
-spoon axle back
-aem intake
-skunk 2 intake manifold
-stage 3 clutch
-gator racing stage 3 axles
now my question is with the following mods and a nice direct port set up running a 100 shot what kinda of whp numbers and 1/4 can i assume, car will be ran on a slick.
weight reduction on the car as follows
-no spare or jack
-no front rebar
-removed sway bars
-removed rear seats and panels
im gonna assume the car would make about 260-270whp on a 100 shot and weigh in at around 2350lbs.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by coreyhayman »</TD></TR><TR><TD CLASS="quote"> 2350lbs.</TD></TR></TABLE>
is the car stripped out? i doubt its going to weigh anything close to that.
is the car stripped out? i doubt its going to weigh anything close to that.
Thread
Thread Starter
Forum
Replies
Last Post




