Password:JDM Thermal Shield Intake Gaskets worth it?
Thread Starter
Honda-Tech Member
Joined: Sep 2002
Posts: 693
Likes: 0
From: Willemstad, Curacao Netherlands Antilles
Anyone can tell me results on this gasket from password jdm.
As product describes>
Password:JDM Thermal Shield Intake Gaskets are inexpensive and very effective! By using a special material, the intake manifold is better insulated from the hot cylinder head. This lowers intake air temperature which, results in more horsepower and protection against detonation.
- Reduces HP robbing heat transfer into the intake manifold
- Precision CNC machined for superior quality
- Dramatically reduces intake air temperature
- Increases horsepower
Please if anyone uses this let me know results etc.
Rishi
As product describes>
Password:JDM Thermal Shield Intake Gaskets are inexpensive and very effective! By using a special material, the intake manifold is better insulated from the hot cylinder head. This lowers intake air temperature which, results in more horsepower and protection against detonation.
- Reduces HP robbing heat transfer into the intake manifold
- Precision CNC machined for superior quality
- Dramatically reduces intake air temperature
- Increases horsepower
Please if anyone uses this let me know results etc.
Rishi
Don't expect to see anything noticeable from one. I have one, and used a heat gun for comparison before/after, about 15 degrees F colder after 20min on the Dyno. They work, but it isn't anything to jump up and down about
They help when the car is going be driven hard for long periods of time I run them in my race car and sell them for much less then Password JDM on my site.
http://WWW.MLRMOTORSPORTS.com
Matt
http://WWW.MLRMOTORSPORTS.com
Matt
Thread
Thread Starter
Forum
Replies
Last Post
AnAccordIsForever
Honda Accord (1990 - 2002)
6
Oct 18, 2005 12:05 PM




