gsr swap question

Reply Subscribe

Thread Tools

Search this Thread

Feb 8, 2007 | 05:58 AM

s2k4life2861

Thread Starter

Junior Member

Joined: Apr 2006

Posts: 183

Likes: 0

From: pembroke pines, fl, usA

gsr swap question

i just purchased a jdm gsr to swap into my ek i know i have to combine both the gsr and the ek harnesses will it work with the jdm gsr harness or do i need a usdm harness

Feb 8, 2007 | 08:12 AM

slomofo

GDD Member

iTrader: (1)

Joined: Jun 2002

Posts: 308

Likes: 5

From: SL,UT

You can extend some wires on the JDM harness or plug a USDM harness right in.

Feb 8, 2007 | 10:34 AM

ekb16

Honda-Tech Member

iTrader: (1)

Joined: Feb 2005

Posts: 2,711

Likes: 0

From: ca

use your stock harness and search, its been covered ALOT of times

Modified by ekb16 at 11:44 AM 2/8/2007

Feb 9, 2007 | 06:14 AM

HondaPartsHero

Technical Hero

Joined: May 2002

Posts: 9,875

Likes: 35

From: Charlotte, NC, 28227

Re: (ekb16)

use your stock harness and run the wiring for the following:

-3 wire IACV to 2 wire
-IAB's
-VTEC solenoid and pressure switch wiring
-knock sensor wiring
-O2 extension harness

Actually the GSR motor prob won't have a VTEC pressure switch so you could just bypass this by grounding the signal wire unless you plan on using the JDM oBD2 GSR ecu