Notices
Mid-Atlantic (Sales) VA, DC, and MD

FS (PARTS): 91 CRX SI PART OUT, Complete B16A Swap EF

Thread Tools
 
Search this Thread
 
Old Feb 1, 2007 | 06:43 PM
  #1  
HackeN's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2005
Posts: 487
Likes: 0
From: Kent Island, MD
Default FS (PARTS): 91 CRX SI PART OUT, Complete B16A Swap EF

Hey everyone, I am parting out my entire 91 CRX SI. Anything from the carpet to the doors. I have some pictures of some of the parts, but its basically a full car, so if you dont see it pictured, then ask me and I will get you the picture.

THE CAR IS NOT FOR SALE AS A WHOLE. It is completely stripped allready.

Let me start with the motor. It is a JDM B16A complete changeover. Purchased it from HMO about 1 year ago and thats all its been driven. The motor itself pulls pretty hard, but could probally use rings and bearing, since they are getting old!
The motor comes with a incomplete gasket kit. Has headgasket and all, its kinda mix and match. Has brand new water pump, brand new timing belt, brand new thermostat. Has only been ran with mobil 1 fully synthetic oil. The engine has a leak on the left side at the valve cover, I am guessing the cam seal plug (Have that in the seal kit). The tranny grinds at high revs, but I think the majority of it was because I needed to get a new clutch cable cause mine couldnt adjust worth a crap.
Other than that no problems. Axles should be good, if there is a boot ripped, I can put a new boot on, and re-grease. Has hasport mounts, innovative shift linkage, energy bushings for the linkage.






Here is the rest of the stuff.
The springs are no longer for sale. The Koni reds have maybe 1 1/2 years on them if that.

JDM ITR Steering wheel



COMPLETE working sunroof assy


Koni reds, (Springs not for sale)


Tail lights


Roofing


Rear Disc (No E-brake Cable)



Gauge cluster & misc interior pieces
(ECU part of full changeover, not for sale seperate)


more misc interior, rear pieces I think


dashboard, 88-89 rear bumper i think, more interior


hatch, with glass, working rear wiper, harness is NOT cut



front suspension setup, control arms, y forks, spindles, hub etc


y49 doors, great shape but dull. the one door is just surface rust as far as I know, easy fix



tail light center pieces, could use alittle buffing or wetsanding


with shift boot, great condition


has hole on right with led light from car alarm. not the best condition, used to be painted silver but restored and stripped paint via brake fluid


carpet, looked beter when it was in the car lol


if you dont see anything ask
all up for offers and pickup only
will meet half way etc.
must go asap
Old Feb 2, 2007 | 06:00 AM
  #2  
HackeN's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2005
Posts: 487
Likes: 0
From: Kent Island, MD
Default Re: FS (PARTS): 91 CRX SI PART OUT, Complete B16A Swap EF (HackeN)

bump

need to sell



hell, will help do the swap for whoever buys it
Old Feb 2, 2007 | 05:19 PM
  #3  
HackeN's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2005
Posts: 487
Likes: 0
From: Kent Island, MD
Default Re: FS (HackeN)

bump
Old Feb 2, 2007 | 06:47 PM
  #4  
EJ1Dream's Avatar
Junior Member
 
Joined: Apr 2006
Posts: 213
Likes: 0
From: Ramona, California
Default

what are you looking to get for the motor?
Old Feb 2, 2007 | 06:53 PM
  #5  
HackeN's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2005
Posts: 487
Likes: 0
From: Kent Island, MD
Default Re: (EJ1Dream)

I dont really have anything in mind, just kinda taking offers

bump
Old Feb 3, 2007 | 06:38 AM
  #6  
HackeN's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2005
Posts: 487
Likes: 0
From: Kent Island, MD
Default Re: (HackeN)

bump
Old Feb 3, 2007 | 02:16 PM
  #7  
HackeN's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2005
Posts: 487
Likes: 0
From: Kent Island, MD
Default Re: FS (PARTS): 91 CRX SI PART OUT, Complete B16A Swap EF (HackeN)

1300 obo on the swap
Old Feb 3, 2007 | 07:19 PM
  #8  
HackeN's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2005
Posts: 487
Likes: 0
From: Kent Island, MD
Default Re: FS (HackeN)

bumpty
Old Feb 4, 2007 | 08:45 AM
  #9  
HackeN's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2005
Posts: 487
Likes: 0
From: Kent Island, MD
Default Re: FS (HackeN)

up
Old Feb 4, 2007 | 12:55 PM
  #10  
noypi's Avatar
 
Joined: Dec 2006
Posts: 55
Likes: 0
From: germantown, md
Default Re: FS (PARTS): 91 CRX SI PART OUT, Complete B16A Swap EF (HackeN)

u got the si rims
Old Feb 4, 2007 | 01:13 PM
  #11  
HackeN's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2005
Posts: 487
Likes: 0
From: Kent Island, MD
Default Re: FS (noypi)

Yes I believe I have 5 of them. They are at my sisters up in PA and I will be heading there next weekend if you would like I will get pics and PM you as soon as I get them.
Old Feb 8, 2007 | 11:56 AM
  #12  
HackeN's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2005
Posts: 487
Likes: 0
From: Kent Island, MD
Default Re: FS (HackeN)

bbbb
Old Feb 17, 2007 | 12:18 PM
  #13  
sticky_racing's Avatar
Junior Member
 
Joined: Mar 2004
Posts: 83
Likes: 0
From: West Richland, WA
Default

how much for the itr wheel? are you willing to ship to 99353?
Old Feb 18, 2007 | 03:37 PM
  #14  
HackeN's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2005
Posts: 487
Likes: 0
From: Kent Island, MD
Default Re: (sticky_racing)

100+ shipping on the wheel.
Old Feb 18, 2007 | 03:39 PM
  #15  
HackeN's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2005
Posts: 487
Likes: 0
From: Kent Island, MD
Default Re: (HackeN)

will also part out the b16 swap components if I can find intrest.
Old Feb 19, 2007 | 03:06 PM
  #16  
HackeN's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2005
Posts: 487
Likes: 0
From: Kent Island, MD
Default Re: (HackeN)

abc123
Old Feb 20, 2007 | 11:33 AM
  #17  
sticky_racing's Avatar
Junior Member
 
Joined: Mar 2004
Posts: 83
Likes: 0
From: West Richland, WA
Default

you have vouches? paypal? ebay?
Old Feb 20, 2007 | 04:36 PM
  #18  
HackeN's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2005
Posts: 487
Likes: 0
From: Kent Island, MD
Default Re: (sticky_racing)

sorry no vouches here yet. I've purchased from various people here thats it.

I am paypal verified, my ebay is nothing special, just a 20 rating since 2001.

Thats the honest run down lol.

Is there any reason you ask?
Old Feb 21, 2007 | 08:27 AM
  #19  
sticky_racing's Avatar
Junior Member
 
Joined: Mar 2004
Posts: 83
Likes: 0
From: West Richland, WA
Default Re: (HackeN)

been scammed a lot. if you put that wheel up on ebay with a bin $100 e-mail me a link to the auction and i'll buy it there.
Old Feb 21, 2007 | 04:57 PM
  #20  
HackeN's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2005
Posts: 487
Likes: 0
From: Kent Island, MD
Default Re: (sticky_racing)

Oh I see.

I have about 5 pending sales on it atm, I just need to see if any of them go through. If not I can post it on ebay.

All items are to be shipped the same day if payment is received before 3:00 PM EST, or the following day. All shipped parts will be accompanied with a tracking number emailed/pmed and a generated packing slip/receipt to be on each shipment for buyers records.

I will build up vouches sooner or later. I guess everyone starts somewhere.

But no problem with being safe, better safe then sorry!
Old Feb 21, 2007 | 09:48 PM
  #21  
sticky_racing's Avatar
Junior Member
 
Joined: Mar 2004
Posts: 83
Likes: 0
From: West Richland, WA
Default

you do the ebay thing for me i'll vouch here and on hondaswap. on hondaswap i'm saturn_boy96 and i have more of a presence there
Old Feb 23, 2007 | 07:57 AM
  #22  
J9D6M's Avatar
Junior Member
 
Joined: May 2006
Posts: 493
Likes: 0
From: Reading, PA
Default Re: (sticky_racing)

How bout rear caliper? Are they in good working condition? How much shipped to 19522
Old Feb 23, 2007 | 09:07 AM
  #23  
HackeN's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2005
Posts: 487
Likes: 0
From: Kent Island, MD
Default Re: (J9D6M)

They were in good condition last time I checked. And they never gave me any problems.
I would say $50 for both the backs, and shipping is $8, so $58 shipped.
It will take roughly 1-2 days delivery shipped out of baltimore.
Old Feb 23, 2007 | 02:02 PM
  #24  
HackeN's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Dec 2005
Posts: 487
Likes: 0
From: Kent Island, MD
Default Re: (HackeN)

Rear lower control arms sold
motor sale pending
Old Feb 25, 2007 | 11:00 AM
  #25  
J9D6M's Avatar
Junior Member
 
Joined: May 2006
Posts: 493
Likes: 0
From: Reading, PA
Default Re: (HackeN)

pm'd



All times are GMT -8. The time now is 02:51 AM.