ok, full we-todd did mode.... trying to fit a ~ 8" tall item in a 6" tall space... anyway, i thought i saw someone mounted the moroso can back where the clutch resivoir(sp) is.... (i've already relocated said res.) i really want to put it there... but alas, i'm like a child with a square peg, a round hole, and a big ******* hammer.

any pics would be helpful, and BSQ, i already know where you put your chit.

D

 

I put my cusco catch can there, it barely fits height wise.

 

hrm....

 

I believe HXGuy did it. talk to him

 

That should get interesting

 

If the hammer is big enough, I'm sure he'll figure something out.

 

I believe that this is his hammer of choice...

 

ROTFLMAO, good call...I'm sure that will get the job done rather quickly!

 

I've had my SRR oil catch can for over 5 months...still sitting there in the garage.

 

 

How did you mount it there?

 

Its hard to see but - I have one big aluminum bracket that holds my FMU and Catch Can. Its spaced out about 1/2 inch from the fire wall - look right behind the FMU to see the top of the bracket I made....

Let me see if I have a better pic..


[Modified by BHSCGSR, 8:24 AM 5/17/2002]

 

FMU? Fuel something something?

 

Its an L shaped bracket bolted at the top......

 

Where did you bolt it? Are there holes already?

 

No - at the top of the bracket I had to drill 2 holes in the firewall....

 

thanks for the pics guys.... moroso can is pretty tall withthe pcv valve in the top.

we'll see how the BFH works.....

D

 

Do you have Endyn/Moroso Breather kit? I just installed it in my car and I used the factory PCV valve because it was about a 1/2 shorter than the one that comes with the kit. I have the little Dyna-Batt so I was able to squeeze it between the battery and the fire wall.

Mattj


[Modified by Dropspeed, 11:03 AM 5/17/2002]