FS FT: Integra 4dr GsR built w/ITR conversion in SC
Thread Starter
Member
Joined: May 2005
Posts: 1,714
Likes: 0
From: under ur bed
FS FT: Integra 4dr GsR built w/ITR conversion in SC
SOLD!!!! TO JEZEK !!!!!!!!!
Ok as the tread says I have my 4dr Integra GsR forsale. This car has been great to me but its time for me to move onto something new. I had this car up forsale before had a buyer but I decided to keep it and do more work on it. This is a pretty strong car to be a 4dr(you can ask anyone in my area). If you know me I take care of my car. All maintance is done at my work Honda. NO LEAKS!! Lets just get to the info on the car.
Just had a new APEXI N1 catback!!! THE REAL ONE!! lol
Please BUMP!
asking.... $8500neg.
Car is located in Spartanburg, South Carolina.
Car:
1996 4door Acura Integra GsR
Dark Metallic Green(5months old)
VIN# ( can be provided upon request )
89,xxx miles
Engine:
LS/VTEC with 300miles... on everything!
98 Integra LS Block 40k miles give or take.
00 B16 Head.
Ferrea exhuast Valves.
Ferrea intake Valves.
ITR valvesprings and retainers.
3angle valve job
Shot peen'd LS rods
ARP rod bolts
New rod bearings
12.5cr JE pistons
STR adjustable cam gears
ITR Exhuast cam
CTR Intake cam
ITR oil pump
GSR waterpump
GSR timingbelt
97 Integra Type R ECU
JDM ITR header
ITR LSD tranny (w/ 7k miles)
CAR has P/S
CAR has A/C
CAR has Heat
Slot'd rotors
This was not a bakyard ls/vtec converion lol I use'd the AC oil sandwich plate, steel branded oil line, with all performance fittings..
Exterior:
Dark Metallic Green
97 JDM Integra Type R 4x114 Conversion
97 JDM Integra Championship White Wheels w/Red Honda Center Cap ( mint condition )
Wheels are wrap'd with Bridgestone Fuzionz (99% tread)
Lower'd on Tein Coils (car rides Great!)
2000 Integra Front,Side, and Rear Conversion(everything was bought BRAND NEW!)
Apexi N1 Catback(slightly scratch'd damn speed bumps! no holes)
NEW apexi n1 install'd
Interior:
Tan Interior(being shampoo'd this weekend)
Alpine CD/MP3 player deck.
Pioneer Speakers all around. (dont like all that WEIGHT for 12's blah blah blah)
Skunk2 shift ****(yes its real lol still got box)
Stock Shortshifter but have short shifter. (didn't like the short shifter)
I'm not sure if I've list'd everything but if something pops in mind I'll be sure to post it up. I've post'd some old and recent pictures of the car... Interior pictures will be taking after the car is fully detail'd. I made a boo boo cause I work at Honda and blah my shoes get dirty but the guys in the wash say they can clean it all up no problem... Now I'll remember to put CLEAR RUBBER MATS on top of my mats.. ALSO YOU WOULD KNOW NOW THAT THE CAR IS SET FOR ALL MOTOR N/A due to the 12.5cr JE pistons.
If anyone has any questions please feel free to contact me. If you live like 1-2hour away from spartanburg I wouldn't mind meeting you somewhere so you can check out the car.<<< SERIOUS PEOPLE ONLY!!! dont waste my time..
Contacts:
PM: dc2-guy
AIM: billy so lazy
Phone: 864-580-9110 (if i dont pickup leave a message)
E-mail: dc2_guy@yahoo.com
Pictures: ENJOY!
thanks for LOOKING PLEASE BUMP!!!
Modified by dc2-guy at 9:41 PM 2/5/2007
Modified by dc2-guy at 10:03 PM 2/5/2007
Ok as the tread says I have my 4dr Integra GsR forsale. This car has been great to me but its time for me to move onto something new. I had this car up forsale before had a buyer but I decided to keep it and do more work on it. This is a pretty strong car to be a 4dr(you can ask anyone in my area). If you know me I take care of my car. All maintance is done at my work Honda. NO LEAKS!! Lets just get to the info on the car.
Just had a new APEXI N1 catback!!! THE REAL ONE!! lol
Please BUMP!
asking.... $8500neg.
Car is located in Spartanburg, South Carolina.
Car:
1996 4door Acura Integra GsR
Dark Metallic Green(5months old)
VIN# ( can be provided upon request )
89,xxx miles
Engine:
LS/VTEC with 300miles... on everything!
98 Integra LS Block 40k miles give or take.
00 B16 Head.
Ferrea exhuast Valves.
Ferrea intake Valves.
ITR valvesprings and retainers.
3angle valve job
Shot peen'd LS rods
ARP rod bolts
New rod bearings
12.5cr JE pistons
STR adjustable cam gears
ITR Exhuast cam
CTR Intake cam
ITR oil pump
GSR waterpump
GSR timingbelt
97 Integra Type R ECU
JDM ITR header
ITR LSD tranny (w/ 7k miles)
CAR has P/S
CAR has A/C
CAR has Heat
Slot'd rotors
This was not a bakyard ls/vtec converion lol I use'd the AC oil sandwich plate, steel branded oil line, with all performance fittings..
Exterior:
Dark Metallic Green
97 JDM Integra Type R 4x114 Conversion
97 JDM Integra Championship White Wheels w/Red Honda Center Cap ( mint condition )
Wheels are wrap'd with Bridgestone Fuzionz (99% tread)
Lower'd on Tein Coils (car rides Great!)
2000 Integra Front,Side, and Rear Conversion(everything was bought BRAND NEW!)
Apexi N1 Catback(slightly scratch'd damn speed bumps! no holes)
NEW apexi n1 install'd
Interior:
Tan Interior(being shampoo'd this weekend)
Alpine CD/MP3 player deck.
Pioneer Speakers all around. (dont like all that WEIGHT for 12's blah blah blah)
Skunk2 shift ****(yes its real lol still got box)
Stock Shortshifter but have short shifter. (didn't like the short shifter)
I'm not sure if I've list'd everything but if something pops in mind I'll be sure to post it up. I've post'd some old and recent pictures of the car... Interior pictures will be taking after the car is fully detail'd. I made a boo boo cause I work at Honda and blah my shoes get dirty but the guys in the wash say they can clean it all up no problem... Now I'll remember to put CLEAR RUBBER MATS on top of my mats.. ALSO YOU WOULD KNOW NOW THAT THE CAR IS SET FOR ALL MOTOR N/A due to the 12.5cr JE pistons.
If anyone has any questions please feel free to contact me. If you live like 1-2hour away from spartanburg I wouldn't mind meeting you somewhere so you can check out the car.<<< SERIOUS PEOPLE ONLY!!! dont waste my time..
Contacts:
PM: dc2-guy
AIM: billy so lazy
Phone: 864-580-9110 (if i dont pickup leave a message)
E-mail: dc2_guy@yahoo.com
Pictures: ENJOY!
thanks for LOOKING PLEASE BUMP!!!
Modified by dc2-guy at 9:41 PM 2/5/2007
Modified by dc2-guy at 10:03 PM 2/5/2007
Trending Topics
Honda-Tech Member
Joined: Apr 2006
Posts: 1,034
Likes: 0
Re: (dc2-guy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dc2-guy »</TD></TR><TR><TD CLASS="quote">lol... its ::: neg. ::: aint really trying to get that much for it... nah mean... plus i've put alot of time and money into this car... well take'n care of.. 
</TD></TR></TABLE>
ill give you 3 bucks and some dog shampoo
</TD></TR></TABLE>ill give you 3 bucks and some dog shampoo