piston/bore ???
Thread Starter
Honda-Tech Member
Joined: Jul 2005
Posts: 3,089
Likes: 0
From: nashville/fresno, tn/ca, Cambodia
piston/bore ???
im looking to put higher comp pistons on my b18a but want to keep the 81mm bore.Have anyone kept the stock bore without any problems etc
Re: piston/bore ??? (sdr KEL)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sdr KEL »</TD></TR><TR><TD CLASS="quote">why not bore it .5 more 81.5mm 
</TD></TR></TABLE>
that extra .5 isnt going to make much of a difference. only overbore if you need to get the cylinders back to round.
</TD></TR></TABLE>that extra .5 isnt going to make much of a difference. only overbore if you need to get the cylinders back to round.
Thread Starter
Honda-Tech Member
Joined: Jul 2005
Posts: 3,089
Likes: 0
From: nashville/fresno, tn/ca, Cambodia
Re: piston/bore ??? (doood)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by doood »</TD></TR><TR><TD CLASS="quote">
that extra .5 isnt going to make much of a difference. only overbore if you need to get the cylinders back to round.</TD></TR></TABLE>
oh yea so i dont have to bore it out i can just throw some p30 pistons in and call it a day
that extra .5 isnt going to make much of a difference. only overbore if you need to get the cylinders back to round.</TD></TR></TABLE>
oh yea so i dont have to bore it out i can just throw some p30 pistons in and call it a day
Re: piston/bore ??? (jdmboi86)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmboi86 »</TD></TR><TR><TD CLASS="quote">
oh yea so i dont have to bore it out i can just throw some p30 pistons in and call it a day </TD></TR></TABLE>
it's not that simple either. depending on the condition of the cylinders you may have to overbore. if not, then a re-hone may be necessary. either way you should replace the bearings since you have everything apart.
oh yea so i dont have to bore it out i can just throw some p30 pistons in and call it a day
</TD></TR></TABLE>it's not that simple either. depending on the condition of the cylinders you may have to overbore. if not, then a re-hone may be necessary. either way you should replace the bearings since you have everything apart.
Thread Starter
Honda-Tech Member
Joined: Jul 2005
Posts: 3,089
Likes: 0
From: nashville/fresno, tn/ca, Cambodia
Re: piston/bore ??? (doood)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by doood »</TD></TR><TR><TD CLASS="quote">
it's not that simple either. depending on the condition of the cylinders you may have to overbore. if not, then a re-hone may be necessary. either way you should replace the bearings since you have everything apart.</TD></TR></TABLE>
oh yea i know but will the rehone keep the stock 81mm trying to stay at 81mm at most
it's not that simple either. depending on the condition of the cylinders you may have to overbore. if not, then a re-hone may be necessary. either way you should replace the bearings since you have everything apart.</TD></TR></TABLE>
oh yea i know but will the rehone keep the stock 81mm trying to stay at 81mm at most
Thread
Thread Starter
Forum
Replies
Last Post