im lookin for a d16y8 . z6 , or y7 block let me know what you have please email me at cpullig1585@aol.com thanks ..

 

I have a bare 94 z6 block..i emailed you also..LMK

matt

 

I have a bare Y8 block and some related parts i.e.

oil pump
main girdle
3 piston and rods
oil pan
alternator mount
ps mount
breather
water pipe
dip stick tube
Timing Belt upper/lower covers
battery cable

 

bump

 

D16a1 bare block $25 + ship crank for same $10+ ship 150k mile motor that ran before I pulled it apart.

jack

 

man i dont know if the a1 is like any of the others i listed

 

i have a bare Z6 block and main girdle. it was bored to 75.5mm, honed, main journals were line bored, top surface was decked, already notched for aftermarket rods to clear, and hot-tanked. it was ran for ~150 miles, then spun a rod bearing. just crank issues, nothing to do with block. <FONT COLOR="red">$100 OBO + shipping.</FONT> i also have 2 Z6 cranks, but one is the one mentioned above that had a spun rod bearing and the other looks fine, but the keyway for the crank pulley key is a little boogered up.

here is an older pic of the block (still looks the same and i can get more pics if interested, PM me if you are):
http://img206.imageshack.us/im...2.jpg