Need your opinion on his REAR Intake manifold *SEARCHED* :)
Thread Starter
Honda-Tech Member
Joined: Apr 2003
Posts: 243
Likes: 0
From: Vienna, AT, Austria
Need your opinion on his RARE Intake manifold *SEARCHED* :)
Hey guys
Im building an NA B18C6 engine with 85 x 89mm Endyn ported head oversize Valves Big tube Tri-Y header Carillo Rods and Pro series Skunk2 stage 2 cam, 12.8:1 comp and lot more but to much to list.
I was looking into getting a nice intake manifold. I know endyn is making some sick manifold but to much $. I was thinking about a Victor X and get the inside ported but than i saw this
What do you thing about this manifold let me know please. check it out.
This manifold is ported, high polish and there are 4 valocity stack inside as in the picture above.
http://cgi.ebay.com/ebaymotors...94193
Modified by crazy_eddy at 12:02 AM 1/15/2007
Im building an NA B18C6 engine with 85 x 89mm Endyn ported head oversize Valves Big tube Tri-Y header Carillo Rods and Pro series Skunk2 stage 2 cam, 12.8:1 comp and lot more but to much to list.
I was looking into getting a nice intake manifold. I know endyn is making some sick manifold but to much $. I was thinking about a Victor X and get the inside ported but than i saw this
What do you thing about this manifold let me know please. check it out.
This manifold is ported, high polish and there are 4 valocity stack inside as in the picture above.
http://cgi.ebay.com/ebaymotors...94193
Modified by crazy_eddy at 12:02 AM 1/15/2007
Joined: Apr 2004
Posts: 4,518
Likes: 1
From: 909 all motor mafia,, CA, USA
Re: Need your opinion on his RARE Intake manifold *SEARCHED* :) (crazy_eddy)
wow I've never seen that before but it looks pretty nice. you should get one and try it.
the edelbrock manifold will make a good peak number but shitty midrange power and torque on an NA motor, at least one with stock stroke. that's what I've seen personally at least.
the edelbrock manifold will make a good peak number but shitty midrange power and torque on an NA motor, at least one with stock stroke. that's what I've seen personally at least.
Senior Member
Joined: Jul 2005
Posts: 3,728
Likes: 0
From: Armonk, NY, USA
Re: Need your opinion on his RARE Intake manifold *SEARCHED* :) (revolt_allmotor)
Honda-Tech Member
Joined: Nov 2003
Posts: 8,963
Likes: 0
Re: Need your opinion on his RARE Intake manifold *SEARCHED* :) (crazy_eddy)
some guy not long ago posted about an engine he was building and was using this manifold...but I think the thread disappeared and nobody has said anything about the outcome of how that intake manifold performs
Re: Need your opinion on his RARE Intake manifold *SEARCHED* :) (Mr.RHTuner)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr.RHTuner »</TD></TR><TR><TD CLASS="quote">some guy not long ago posted about an engine he was building and was using this manifold...but I think the thread disappeared and nobody has said anything about the outcome of how that intake manifold performs</TD></TR></TABLE>
yea that was the thread where the guy had the ports hogged out so much gasket sealing would be damn near impossible
yea that was the thread where the guy had the ports hogged out so much gasket sealing would be damn near impossible
Honda-Tech Member
Joined: Nov 2003
Posts: 8,963
Likes: 0
Re: Need your opinion on his RARE Intake manifold *SEARCHED* :) (doood)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by doood »</TD></TR><TR><TD CLASS="quote">
yea that was the thread where the guy had the ports hogged out so much gasket sealing would be damn near impossible</TD></TR></TABLE>
hahaha, yea that was it...couldn't point my finger on what it was about.
yea that was the thread where the guy had the ports hogged out so much gasket sealing would be damn near impossible
</TD></TR></TABLE>hahaha, yea that was it...couldn't point my finger on what it was about.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post