TW: Full-race stage3 topmount full kit.
Im thinking about going K-series on my car so im looking to sell my Full-race turbo kit that i picked up through Terry(Boostfed). This is a full kit everything its here is the link to the spec
http://www.full-race.com/catal...id=32
I upgraded the manifold to a topmount and the downpipe to a 4' have all the piping for the intercooler. This is a full kit nothing wrong with it. I have had it for about 5 months way waiting for motor to finish and winter to start coming to a end.
Looking for $3800 shipped not parting out sorry.
Also have a fully built LS/Vtec.
Here is the list off the top of my head shoot me some offers
LS/Vtec
golden Engle Sleeves 84.5
CP pistons 9.1
engle rods
type R water/oil pump
Head
milled 1.0 over on both intake and exhuast
small port job.
Farrar(sp) valves
supertech dual valve springs and retainers
CTR cams
Toda Cam gears
Toda timing belt
Victory X intake manifold
BDL 70mm throttle body
880 cc injectors
Trans
B16 trans with type R final drive
Cusco 2 way slip LSD
$5500 obo
thats all i can remember off the top of my head right now. If nothing else just hit me up pm or email mustb18si@yahoo.com
here is one pic when the kit first came in

Here is a pic of the topmount with the 4' downpipe

Here is a pic of a test fitting on the motor with the topmount only


Modified by RedRCKT000 at 12:39 PM 1/14/2007
Modified by RedRCKT000 at 1:52 PM 1/14/2007
Modified by RedRCKT000 at 9:57 AM 1/15/2007
Modified by RedRCKT000 at 11:40 AM 1/15/2007
http://www.full-race.com/catal...id=32
I upgraded the manifold to a topmount and the downpipe to a 4' have all the piping for the intercooler. This is a full kit nothing wrong with it. I have had it for about 5 months way waiting for motor to finish and winter to start coming to a end.
Looking for $3800 shipped not parting out sorry.
Also have a fully built LS/Vtec.
Here is the list off the top of my head shoot me some offers
LS/Vtec
golden Engle Sleeves 84.5
CP pistons 9.1
engle rods
type R water/oil pump
Head
milled 1.0 over on both intake and exhuast
small port job.
Farrar(sp) valves
supertech dual valve springs and retainers
CTR cams
Toda Cam gears
Toda timing belt
Victory X intake manifold
BDL 70mm throttle body
880 cc injectors
Trans
B16 trans with type R final drive
Cusco 2 way slip LSD
$5500 obo
thats all i can remember off the top of my head right now. If nothing else just hit me up pm or email mustb18si@yahoo.com
here is one pic when the kit first came in

Here is a pic of the topmount with the 4' downpipe

Here is a pic of a test fitting on the motor with the topmount only


Modified by RedRCKT000 at 12:39 PM 1/14/2007
Modified by RedRCKT000 at 1:52 PM 1/14/2007
Modified by RedRCKT000 at 9:57 AM 1/15/2007
Modified by RedRCKT000 at 11:40 AM 1/15/2007
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post




