hi i have a 91 integra with a b18a1 motor, i also have a blown head gasket and possibly more . So i have coolant in the spark plugs, over heating, and liquid (probably coolant) spraying out from the blown head. i drove the car when it was over heating, really bad , so i was wondering, if there is anything else i have to worry about besides the head gasket, ie. warped block/head?? i really need help, need to start fixing the car fast.

 

get the head resurfaced and a valve job woulb be good since the head is already off

 

oh yeah and have them magnaflux the head to see if its cracked

 

use a "precision" straight edge and measure the deck of the block for straightness

 

Deffinitely could be a warped head but you'd want to have a machine shop check for it as previously stated with precesion instruments, it may need resurfaced/shaved down.

 

so i should just get the head checked? so there shouldn't be anything wrong with the block then? thank you every one for the replies, good advice.

 

do you think my block will be fine?