Anyone rocking 13" Wheels to AutoX or Time Attack. Maybe you can post the specs. Tire Sizes and such. Thanks

I seen an EK with a 13x?.? Wheel. It looked like a steelie. Im trying to find these. They had a nice offset and had a 215 50 13 IIRC. Thanks

 

The steelies are most likely from Diamond or Circle racing. They are OK, I had a set of the Circle 13x7's on my H5 car but the offset wasn't quite right for what I needed. Right now I'm using 13x7 Revolutions up front and 13x6 old JDM mesh wheels in the back. Next season I'll be using 13x6 Volk TE37's with my Toyo's dry weather tires and my 13x7 Revolutions with my rain tires.

13's that I have or have used with Kumho 215/50-13s
13x5.5 Honda wheels, too narrow but dirt cheap (for sale)
13x7 Circle Racing wheels, offset not quite right (sold them)
13x7 Revolution (white center) my favorite set
13x7 Revolution (Silver centers) just as good as the white ones (For Sale, I have six of them)
13x6 Panasport style, OK (For Sale)
13x6 JDM 3 piece mesh wheels, nice and light but Bookler bent one.
13x6 Volk TE37's

If you want to buy any of the ones I have for sale shoot me a PM.

Zephyr

 

13x7 Circles with V710's

 

I run the following:

13x7 Revolutions with Kumho V70A
13x8 3-Piece Duralites with Kumho V710

Both sets of tires are 215/50-13

 

I run 13x8" custom widened Honda steel wheels (backspacing is 5" which works out to about +25mm offset) with 225/45-13 Hoosiers for autocrossing, like just about everyone else running a Civic or Miata in CSP and FSP . . .

 

13x8 Rota RB (4" of backspacing)
Currently using 225/50 Hoosiers, about to switch to 215/50/13 Kumho 710's.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jaje &raquo;</TD></TR><TR><TD CLASS="quote">I have steel Diamond Racing 13x7 for my H5 car (rim alone is like 13lbs but only costs $7). <U></U></TD></TR></TABLE>


How did you get that price? I am looking at a little over $100 for two rims?


Hook me up.

 

Oops...It was a typo in there. I got my wheels for $70 each with taxes. I got the ones that were rolled meaning they are lighter than the other 13" wheels.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">I have steel Diamond Racing 13x7 for my H5 car (rim alone is like 13lbs but only costs $7). Back spacing was maxed at 4.5". They work well with 225 wide tires. Unfortunately the shop that put on the tires bent the rims a little. Is there a special way they should do this or they just screwed up.

For rains I use 13x5 Vx wheels - 9.5lbs each so they are really light - but they are getting a little harder to find and are starting to cost a lot of moolah. - edited</TD></TR></TABLE>