Im on my third one. First one went after my car sat awhile and I recharged the battery. I didnt disconnect the cables when doing so. Car started after that and ran fine ( just in driveway while I rebuild it ). Car sat again for a few months without being started, so I charged up the battery again ( again not thinking didnt remove cables ) and it went out again, so I bought a new one. This time, when I put the 3rd one in, I removed the battery from the car and charged it. Put it back in the car and it started right up. I let it run for like an hour. This was a week ago. Today I went out there to start it and now again, its not starting giving me the same symptoms as if it were the ignition control module again. Whats going on? Why did it go out this time around? I had the car repainted, and all grounds are back in, but could it still be a bad ground? Any help would be greatly appreciated. Thanks

 

Bump

 

Bad plug wires or plugs can kill the module. I'd replace the wires with a new OEM set. The OEM honda wires are better than the aftermarket wires.