im just wondering if the hangers and such are in the same places and if the muffler will poke too far out or too short of my bumper running my stock cat.

Will it fit my bumper right?
Will i need a custom length test pipe?
thanks in advance and yes i did search but got no clear answers. BTW its an Apexi WS2 off of a gsr and i drive a 98 EK Coupe

EDIT: Here is what ive gathered so far.
- The mid-pipe should be the same but the axle-back will either need to be shortened or lengthened.
- Might need to get a Custom length test pipe


Modified by xxsteve803xx at 9:09 AM 12/20/2006

 

bump

 

From what I've read in other threads...it will either be one of the following...

1. A few inches short of meeting up with the cat.

OR

2. Stick out a few inches past the bumper, which in my opinion isnt a big deal, especially if you got a killer deal on the exhaust.

I know this is true for some situations but I am not fully sure about your's in general. Hopefully someone more knowledgeable than I can help you out soon.

Good luck! BTW...I love the World Sport..it sounds gorgeous!

 

thanks alot dude, my buddy is selling me his off his teg for 60 bucks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xxsteve803xx &raquo;</TD></TR><TR><TD CLASS="quote">thanks alot dude, my buddy is selling me his off his teg for 60 bucks </TD></TR></TABLE>


Shieeet...I'd scoop that up in a heartbeat. If you find that it doesnt fit to your standards you can sell that for a KILLER profit any day of the week.

Good luck man, and congrats on the purchase. You definitely got a deal! It could have a rust hole in it and STILL be a nice deal, haha.

After you get it and try it out, post in this thread letting us know how it went. Since you put a correct descriptive title on the thread, people searching in the future will DEFINTELY come across this thread. And since there's no definite answer in this thread...that will answer the question for future users.

 

i was looking into that too

 

bump up to help me out and whoever else wants to know out!!

 

Here is my integra LS catback on my ek coupe. I had it custom welded to fit nicely. Had a pretty big gap between the tip and bumper w/out the back lip however. I like it

Hope this helps

 

The AXEL BACK will fit, the MID PIPE will not. I had a greddy EVO2 from a DC2 on my ek coupe. The axel back portion fit fine allthough the mid pipe did not.

 

just picked up the exhaust Its in pretty good shape. Needs some welding done on the bottom of the rosonator due to scrapeage. Ill let you all know how the install goes within the next few days

 

I read somewhere that the 4dr Integra exhaust will fit 92-00 coupes.... But I haven't tested it out so I don't know for sure.

 

you will have to cut the midpipe 2-3 inches and remount the hanger under the shifter for it to work. thats how i got my gsr cat back to fit

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BBY98EX &raquo;</TD></TR><TR><TD CLASS="quote">you will have to cut the midpipe 2-3 inches and remount the hanger under the shifter for it to work. thats how i got my gsr cat back to fit </TD></TR></TABLE>

Funny, some exhaust companies, such as thermal, us the same mid pipe for EK/DC's, and just change the rear section.