ok so i just bought some new wheels 16x8 blitz 01s +32 offset. now i did search and found that picture diagram but i have no idea how to figure out if i can fit them behind my new wheels. has anyone ran this set up before?

 

anyone?

 

i am almost 100% positive it will clear with an 8in wheel and a +32 offset

most 7in wheels clear with a +38 offset and some depending on the shape of the spokes clear with +42 offset

 

Have you tried reading through this thread;
https://honda-tech.com/zerothread?id=1241825

Ali

 

pretty sure it'll be fine

 

Again being 16x8 and w/ that low of an offset you shouldn't have a problem

 

if those calipers clear 15 in +50mm offset wheels.... then id imagine you'd have plenty of clearance

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PrinceAli132 &raquo;</TD></TR><TR><TD CLASS="quote">Have you tried reading through this thread;
https://honda-tech.com/zerothread?id=1241825

Ali</TD></TR></TABLE>
yea i saw that. says nothing about blitz 01s thanks. and thanks everyone everyone else

 

Perhaps we shold put together a list of wheel sizes and offsets that WILL and WILL NOT clear the Spoom clapperz, eh?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jon D &raquo;</TD></TR><TR><TD CLASS="quote">Perhaps we shold put together a list of wheel sizes and offsets that WILL and WILL NOT clear the Spoom clapperz, eh? </TD></TR></TABLE>
great idea

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jon D &raquo;</TD></TR><TR><TD CLASS="quote">Perhaps we shold put together a list of wheel sizes and offsets that WILL and WILL NOT clear the Spoom clapperz, eh? </TD></TR></TABLE>

It has already been done:
https://honda-tech.com/zerothread?id=324343

Too bad the thread title didn't have the right keywords so it is very difficult to search.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Wai &raquo;</TD></TR><TR><TD CLASS="quote">

Too bad the thread title didn't have the right keywords so it is very difficult to search.</TD></TR></TABLE>

Unfortunately.... many of us have experienced this from time to time when looking for a piece of information.

Thanks for pointing that out though Wai