Motor needs rebuild here is are my plans
Thread Starter
* B A N N E D *
Joined: Jun 2004
Posts: 3,087
Likes: 0
From: bay area, ca
Motor needs rebuild here is are my plans
Here is my thread on my story
https://honda-tech.com/zerothread/1825570
Yea i only had car for 1 month and did compression test by mechanic 185 on all 4 cylinders. Im not idiot bro. If it was my car i would have a splash shield there and the firewall hole , i wasnt aware of it. Come on. Screw this here is setup up im going for full rebuilt
CP PISTONS 11:5:1
EAGLE BEAM RODS
BLOX TYPE B CAMS
JDM TYPE R HEADER
PORTFLOW VALVE SPRINGS
GETTING THE BLOCK HONED BORED .5MM OVER
HEAD GOING TO MACHINE SHOP PORT POLISH
MY GOALS ARE 200WHP
https://honda-tech.com/zerothread/1825570
Yea i only had car for 1 month and did compression test by mechanic 185 on all 4 cylinders. Im not idiot bro. If it was my car i would have a splash shield there and the firewall hole , i wasnt aware of it. Come on. Screw this here is setup up im going for full rebuilt
CP PISTONS 11:5:1
EAGLE BEAM RODS
BLOX TYPE B CAMS
JDM TYPE R HEADER
PORTFLOW VALVE SPRINGS
GETTING THE BLOCK HONED BORED .5MM OVER
HEAD GOING TO MACHINE SHOP PORT POLISH
MY GOALS ARE 200WHP
Thread
Thread Starter
Forum
Replies
Last Post
pLaTiNumSR20
All Motor / Naturally Aspirated
23
Apr 5, 2007 09:29 PM