F/s: D16z6 turbokit (fully tuned); JG I.M.; Other extras
like topic says, i will include:
1500 SHIPPED INCLUDING PAYPAL FEE! FIRM FOR TURBO KIT NEED GONE THIS WEEK!
Drag Manifold
Turbonetics t3/t4 57trim .63ar
spoolin performance 2.5 inch downpipe (Ac % Ps compatible)
Oil drain line
oil pan
tee fitting for the block
oil feed line
2.5 inch charge piping
hks ssqv Bov
Drag Intercooler
Tial 38mm Wg with 9lb spring
Dh-racing Port and polished intake manifold
Rpm 68mm throttle body
spw oil pressure gauge
spw a/f ratio gauge
spw boost gauge
A-pillar for the gauge
all couplers and clamps
this turbo kit has seen about 6.5k miles in a little less than 1 year. i only drive it on the weekends only or on nice days. it is street tuned with uberdata with a plx-m300. I have spend alot of time tuning the car, it 14.7 for partial throttle and 12:1 in boost. i will include the eeprom chip for the buyer, all they need is a chipped ecu and injectors. it was tuned for 750cc injectors, but i will scale it down to whatever the buyer has. im asking 1500 shipped!!. i have a map that is fully tuned on a stock d16z6 with the intake manifold and the rpm tb. thats why i can't seperate those parts from the kit.



here i have a Edelbrock Performer X manifold. looking for 200shipped. bought it from another h-t member but i never got a chance to use it. SOLD! to a local buyer

Spoon style carbon fiber mirrors for 92-95 civic. bought them from jdm **** for 160 brand new. looking for 100shipped. i have one pic of a mirror but you get the idea.

Denji Projectors (Immaculate condition) 100shipped SOLD!
Modified by LilCivic04 at 7:46 PM 11/29/2006
Modified by LilCivic04 at 10:05 PM 12/1/2006
Modified by LilCivic04 at 12:36 PM 12/4/2006
Modified by LilCivic04 at 6:22 PM 12/4/2006
Modified by LilCivic04 at 5:05 AM 1/17/2007
1500 SHIPPED INCLUDING PAYPAL FEE! FIRM FOR TURBO KIT NEED GONE THIS WEEK!
Drag Manifold
Turbonetics t3/t4 57trim .63ar
spoolin performance 2.5 inch downpipe (Ac % Ps compatible)
Oil drain line
oil pan
tee fitting for the block
oil feed line
2.5 inch charge piping
hks ssqv Bov
Drag Intercooler
Tial 38mm Wg with 9lb spring
Dh-racing Port and polished intake manifold
Rpm 68mm throttle body
spw oil pressure gauge
spw a/f ratio gauge
spw boost gauge
A-pillar for the gauge
all couplers and clamps
this turbo kit has seen about 6.5k miles in a little less than 1 year. i only drive it on the weekends only or on nice days. it is street tuned with uberdata with a plx-m300. I have spend alot of time tuning the car, it 14.7 for partial throttle and 12:1 in boost. i will include the eeprom chip for the buyer, all they need is a chipped ecu and injectors. it was tuned for 750cc injectors, but i will scale it down to whatever the buyer has. im asking 1500 shipped!!. i have a map that is fully tuned on a stock d16z6 with the intake manifold and the rpm tb. thats why i can't seperate those parts from the kit.


here i have a Edelbrock Performer X manifold. looking for 200shipped. bought it from another h-t member but i never got a chance to use it. SOLD! to a local buyer
Spoon style carbon fiber mirrors for 92-95 civic. bought them from jdm **** for 160 brand new. looking for 100shipped. i have one pic of a mirror but you get the idea.

Denji Projectors (Immaculate condition) 100shipped SOLD!
Modified by LilCivic04 at 7:46 PM 11/29/2006
Modified by LilCivic04 at 10:05 PM 12/1/2006
Modified by LilCivic04 at 12:36 PM 12/4/2006
Modified by LilCivic04 at 6:22 PM 12/4/2006
Modified by LilCivic04 at 5:05 AM 1/17/2007
Trending Topics
pics of the intake manifold? The one that comes with the kit.
You should just separate that out anyway, because the buyer is more likely going to want to re-tune anyway.
You should just separate that out anyway, because the buyer is more likely going to want to re-tune anyway.
bump! still haven't took the turbokit out yet....... if someone buys, ill tkae it out asap. ill take offers
Thread
Thread Starter
Forum
Replies
Last Post
91civicDXdude
Honda CRX / EF Civic (1988 - 1991)
1
Jan 24, 2004 02:51 PM



