Well, my ******* car was stolen on Friday night, and I know I'm not getting it back in one piece with Reading about an hour away. Up for sale is what I have that I was going to build a block with:

B18C5 Bare block needs bore/hone to clean up surface rust, I bought to Sleeve. *SOLD*
B18C5 crank from Block, needs to be polished *$SOLD*
LS crank that's been micropolished, bought from Evans-Tuning *SOLD*
P72 oil pan that came off my car when I installed the turbo *SOLD*
TurboXS Dual stage boost controller with MSD window switch *$SOLD*
GSR flywheel needs resurfaced *$40*
AEM CAI that's cut for short ram intake, but will include lower piece for CAI *SOLD*

I don't have pics yet because I can't find my card reader, but everything is in good shape, and would like local pick up for the big items. Shoot me reasonable offers. Pics will be up soon.





ITR Crank:










Modified by nebulight at 11:10 AM 11/29/2006


Modified by nebulight at 10:37 AM 12/3/2006


Modified by nebulight at 8:54 AM 12/15/2006


Modified by nebulight at 12:07 PM 12/15/2006


Modified by nebulight at 9:56 AM 12/19/2006


Modified by nebulight at 7:10 PM 12/19/2006


Modified by nebulight at 9:27 PM 12/28/2006

 

bump

 

how much for the crank and block i might know someone interested

 

how much for block and ls crank?

where in pa?

 

I'd like to get 250 for the block and 200 for the LS crank (what I paid) and open to offers on the other stuff.

 

where in pa? zipcode so i can get an idea of distance? pm me if you like.

 

17601

 

how much for the itr crank

 

$125 sound fair? It will need to be polished.

Bottom line, my car was just stolen, I put around 7k into the car on top of what I paid for the car, and I'm most likely only going to get blue book value because state farm is going to expletive me over! I'll let this stuff go cheap, just don't super low ball me.

 

Bump

 

hmm, you are almost 4 hours away. any chance of meeting somewhere between?

is the block completly stripped? do you at least have the main caps, and girdle setup?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by intevic_dx &raquo;</TD></TR><TR><TD CLASS="quote">hmm, you are almost 4 hours away. any chance of meeting somewhere between?

is the block completly stripped? do you at least have the main caps, and girdle setup?</TD></TR></TABLE>

I wouldn't mind meeting up somewhere, maybe in Philly or something, I go up there all the time.

The motor is not completly stripped, it still has mains and the girdle, as well as the water pipe and knock sensor and the oil catch black box. I'll really try to get pics up. What other stuff are you interested in?

 

Bump for lots of interest but no takers.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nebulight &raquo;</TD></TR><TR><TD CLASS="quote">

I wouldn't mind meeting up somewhere, maybe in Philly or something, I go up there all the time.

The motor is not completly stripped, it still has mains and the girdle, as well as the water pipe and knock sensor and the oil catch black box. I'll really try to get pics up. What other stuff are you interested in?</TD></TR></TABLE>

im looking for the block with main caps, girldel, etc. and ls crank and rods. im looking to build a short block for my car over the winter. my rings are shot in my b16 and im trying to limit my down time. wanna have a motor built and ready to drop in.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by intevic_dx &raquo;</TD></TR><TR><TD CLASS="quote">

im looking for the block with main caps, girldel, etc. and ls crank and rods. im looking to build a short block for my car over the winter. my rings are shot in my b16 and im trying to limit my down time. wanna have a motor built and ready to drop in.</TD></TR></TABLE>

Well I do have another buyer lined up, but you were first, so I'll give you a shot at it. I do have the LS crank for $200 and the block for $225, but I don't have rods. Let me know because I'm going to deal with the other guy if you don't want it.

 

Here are some quick web shot pics of the LS crank (look at the reflection), and one crappy shot of the block:

 

If intevicdx doesn't buy i have cash in hand

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SpoonSirG &raquo;</TD></TR><TR><TD CLASS="quote">If intevicdx doesn't buy i have cash in hand </TD></TR></TABLE>

yep, you were the other buyer lined up. He might not be able to make it down, because he is kinda far from me as well. I'll keep you posted.

 

sounds good. thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SpoonSirG &raquo;</TD></TR><TR><TD CLASS="quote">If intevicdx doesn't buy i have cash in hand </TD></TR></TABLE>

Sale pending on the B18C5 block and crank!


Modified by nebulight at 5:19 PM 12/2/2006

 

Bump to get this stuff moving!

 

Bump for prices added to op

 

Bump for some good stuff, motor is pretty much sold!

 

Block Sold to me

 

Bump